Dolphin X 40 PLUS User Instructions
Text of Dolphin X 40 PLUS User Instructions
X 40 PLUS
User Instructions
Contents
1. INTRODUCTION ...................................................................... 2
2. SPECIFICATIONS ...................................................................... 2
3. WARNINGS AND CAUTIONS .................................................. 2
3.1 Warnings ............................................................................ 2
3.2 Cautions ................................................
Thank you for purchasing a Maytronics Robotic Pool Cleaner.
We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient
and cost-effective pool cleaning. Its reliable filtration in all pool conditions and active brushing,
enhance pool hygiene.
Robotic Pool Cleaners by Maytronics deliver advanced cleaning technologys, long-lasting
performance and easy maintenance. Yo
4. POOL CLEANER PARTS
Caddy kit
Power supply unit
Filtration
Robotic Pool Cleaner
Dolphin X 40 PLUS| User Instructions
5. USING THE POOL CLEANER
5.1 Setup
Before using the Pool Cleaner for the first time, perform the following steps:
Position the power supply
so that it is approximately in the
middle of the long side of the
pool at a distance of 3m /10ft.
Unwind the cable and stretch it out completely so that it has
no kinks.
Attach the floating cable to the power
supply by inserting it with the notch on the
connector (1), lined up with the groove in
the socket on the po
5.2 Putting the Pool Cleaner into the pool
Put the Pool Cleaner into the pool.
Release the Pool Cleaner and let it sink to the floor
of the pool.
Make sure that the floating cable is free of any
obstructions.
5.2.1
Turn the power supply ON.
The Pool Cleaner will now operate until it has
reached the end of the cleaning cycle.
5.2.2
ON
Dolphin X 40 PLUS| User Instructions
CAUTION DO NOT PULL THE POOL CLEANER FROM THE POOL USING THE CABLE.
5.3.3 Place the Pool Cleaner on the edge of the pool and let the water drain out.
5.3.2 Using the floating cable, bring the Pool Cleaner to the pool’s edge.
Using the handle, remove the Pool Cleaner from the pool.
5.3 Removing the Pool Cleaner from the pool
CAUTION Turn OFF and unplug the power supply.
5.3.1
Dolphin X 40 PLUS| User Instructions