ECD HCA1 Instruction Manual

Text of ECD HCA1 Instruction Manual

HCA1 Chlorine Plus Photometer System

Instruction Manual Ideal for the measurement of Free and Total Chlorine in Drinking Water, Waste Water, Environmental or other clear water samples

Parts Order/Reorder Information

Part# Description 1000040-1 Meter, case and 2 bottles test strips, Free chlorine and total Chlorine 1000040-2 Meter, case and 2 bottles of test strips, Free chlorine 1000040-3 Meter, case and 2 bottles of test strips, Total chlorine 1000040-4 Meter, case and 2 bottles of test strips, Chlorine Dioxide 1000040-5 Meter, case and 2 bottles of test strips, High Range chlorine 1000040-6 Meter, case and 2 bottles of test strips,

HCA1 Chlorine Plus Specifications ........................................................ 4

HCA1 Range and Accuracy .................................................................... 4 HCA1 General Information .................................................................... 5 Accuracy and Calibration ...................................................................... 5 Compliance Verification for Free and Total Chlorine Testing .......

HCA1 Chlorine Plus Specifications

Measurement method: Photometric Light source: Light Emitting Diode (LED) Wavelength: 525 nm Transmission Range: 0.0 – 100% Photometric precision: ± 0.1/0.01 %T Display: 3 digit LCD with annunciators Cell path length: 20 mm Cell Chamber: Molded PET plastic, non-removable Sample requirement: 4 ml Temperature range: 0 - 50°C Power Supply: (4) AAA alkaline batteries, not included Battery Life: >2000 tests with alkaline b

HCA1 General Information

In order to save power, the meter is designed to turn off after 3 minutes (timed from the last button pressed). Should the meter turn off in the middle of a test, the last stored zero in the meter will remain valid when the meter is turned on again. Also, the test result is stored in memory for easy retrieval. The HCA1 Chlorine Plus meter is controlled by three buttons: 1. ZERO/ON: When first pressed, this button turns the meter

calibration, the Ready Snap® 3 Calibration Verification Standard part #490903) is

available for purchase. Compliance Verification for Free and Total Chlorine Testing This DPD test system is accepted by most health departments because this test is USEPA (DIN Standard 38 408 G4, ISO 7393/2) accepted for testing requirements for Free and Total Chlorine. The Chlorine Plus meter uses a wavelength of 525nm; and the compliance requirement is that the colorimet

ECD Measuring Instruments Owners Instructions: