Fermax DT591 Operation & User’s Manual

2.Terminal Descriptions .......................................................................................... 1 3.Specifications .................................................................................................... ...

Rainy Cover Camera Lens Night View LED Speaker Nameplate Call Button Microphone 3.54 in 6.93 in 0.91 in 2.Terminal Descriptions BUS PL S1+ S2+ S- 1 2 ON 1 2 ON MIC adjustment Lock Control Jumper Doorstation Code DIP Main Connect Port 1 2 3 SPK adjustment Note: DT592 has two call buttons. ...

• Doorstation Code DIP: Total 4 doorstations can be supported,see 6.1 • Main Connect Port: To connect the bus line and the electronic locks. • BUS: Connect to the bus line, no polarity. • PL: External lock power input, connect to the power positive(power +). • S1+, S2+: L ...

63-65 in Rainy cover The distance between the top of main unit and rain cover should be not less than 3mm. Rainy cover Main unit ≥3mm Main unit 1 2 1 2 3 4 1 2 ON 4.3 Placing Name Label Move the plastic cover away to open the transparent name label cover, insert a name paper, then put the plastic cover back to the panel. ...

5.System Wiring and Connections Doorbell Button Switch - + 1 2 ON L1 L2 PL S1+ S2+ S- + - DPS DR-30-24 Code=00, DIP6=on 1 2 3 4 5 6 ON DIP L2 L1 DIP Switches 5.2 Electric Lock Connection (NOT RECOMMENDED). See Page 6. 5.2.1 Door Lock Controlled with Internal Power Note: NOT RECOMMENDED unless the door lock is less than 250mA. P ...

Note: 1. The external power supply must be used according to the lock. 2. The jumper must be taken off before connecting. 3. Setup the Unlock Mode of Monitor for different lock types. • Power-on-to-unlock type:Unlock Mode=0 (by default) • Power-off-to-unlock type:Unlock Mode=1 LOCK BUS PL S1 + S2 + ...

1 2 ON L1 L2 PL S1+ S2+ S- 1 2 ON L1 L2 PL S1+ S2+ S- 1 2 ON L1 L2 PL S1+ S2+ S- 1 2 ON L1 L2 PL S1+ S2+ S- 1 2 ON 1 2 ON 1 2 ON 1 2 ON 1# Camera ID=00 ID=10 ID=01 ID=11 2# Camera 3# Camera 4# Camera DBC4A1 A B C D OFF ON Impedance switch + - DPS DR-30-24 ...

5.4 Multi Monitors Connection ID=00 1 2 ON Code=14 Code=15 NOTE:Here we take DT47MG(the monitor) for example. Code=0 + - DPS DR-30-24 ...