GE TransPort Quick Start Manual

Text of GE TransPort Quick Start Manual

Oil & Gas

Flow 916-146 Rev. A January 2017 TransPort® PT900 Portable Ultrasonic Flow Meter for Liquids Quick-Start Guide

TransPort® PT900 Quick-Start Guide

1 Contents 1.0 Registration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2.0 Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3.0 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4.0 Unpacking the PT900 System . . . . . . . . . . . . . . . . . . . . . . . . . .

TransPort® PT900 Quick-Start Guide

2 3.0 Safety Information The PT900 system must be installed and operated in accordance with the information in this section. 3.1 Safety Issues 3.1 Questions de sécurité WARNING! It is the responsibility of the user to make sure all local, county, state and national codes, regulations, rules and laws related to safety and safe operating conditions are met for each installation. WARNING! It is the responsibility of the u

TransPort® PT900 Quick-Start Guide

3 3.2 Installation Requirements WARNING! The PT900 flow transmitter can measure the flow rate of many fluids, some of which are potentially hazardous. The use of proper safety practices must be emphasized. WARNING! Be sure to follow all applicable local safety codes and regulations for installing electrical equipment and working with hazardous fluids or flow conditions. Consult company safety personnel or local safety au

TransPort® PT900 Quick-Start Guide

4 4.0 Unpacking the PT900 System Before removing the PT900 system from its carrying case (see the optional hard shell carrying case in Figure 1 on page 5), inspect the contents of the case carefully. Before discarding any of the packing materials, account for all components and documentation listed on the packing slip. If anything is missing or damaged, contact GE Customer Care immediately for assistance. Because the PT9

TransPort® PT900 Quick-Start Guide

5 4.0 Unpacking the PT900 System (cont.) Figure 1: PT900 System in Hard Carrier Case 1 2 4 5 14 10 7 8 11 12 3 6 9

TransPort® PT900 Quick-Start Guide

6 5.0 Charging the PT900 Transmitter and Tablet Before proceeding, make sure that both the PT900 Transmitter and the Tablet are fully charged. The AC power adapter is shipped in the carry case. If either the transmitter or the tablet cannot be powered On after charging, contact your GE representative for assistance. To charge the transmitter, use the AC power adapter provided. Charging will occur whether the PT900 is On

TransPort® PT900 Quick-Start Guide

7 6.2 Installing the APP on the Tablet To install the APP, complete the following steps: 1. Open the “My Files” folder on the tablet screen (see Figure 3 below) and select the APP from the SD folder. Figure 3: The “My Files” Folder 2. If the APP is from an SD card or the GE website, enable the security option in the tablet’s settings (see Figure 4 below) to allow the installation of software from “Unknown sou

TransPort® PT900 Quick-Start Guide

8 6.2 Installing the APP on the Tablet (cont.) 3. Click on the APK file, and the Android operating system will verify the checksum and signature for the file. Depending on whether this is an initial installation or an update installation, you will see a screen similar to Figure 5 below. Click “Install” to begin the installation. Figure 5: Initial Installation Screen

GE Measuring Instruments Owners Instructions: