Harbor Breeze JP18EB3 Instructions Manual

of LF, LLC. All Rights Reserved. ITEM #0275422 MODEL #JP18EB3 Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday. ATTACH YOUR RECEIPT HERE Serial Number Purchase Date XXXX ...

Please read and understand this entire manual before attempting to assemble, install or operate the product. TABLE OF CONTENTS 2 Lowes.com/harborbreeze SAFETY INFORMATION • Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for repairs, it must be shipped in its original packaging ...

mounting bracket provided with the fan. Secure the wall mounting bracket directly to the building structure on a wood stud or wood post or beam. Do not install directly to drywall. The wood stud or wood post and ...

parts provided with this fan for proper installation and safety. A Fan Assembly 1 B Wall Mounting Bracket 1 C Front Cage 1 D Blade Assembly 1 E Back Cage 1 F Blade Assembly Nut 1 (preassembled) G Set Screw 1 (preassembled) H Fuse 1 (preassembled) DESCRIPTION PART QUANTITY 4 Lowes.com/harb ...

contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 90 minutes Tools Required for Assembly (not included): Phillips Screwdriver, Drill, Drill Bit, Stud Finder, Flathead S ...

supply line leads. DANGER: Failure to disconnect power supply prior to installation may result in serious injury or death. 1. 2. ASSEMBLY INSTRUCTIONS ON OFF ON OFF 2 1 Lowes.com/harborbreeze 7 ft min. This fan assembly (A) can only be mounted on an indoor wall or on an enclosed porch or enclose ...

want the fan to be located on the wall. Then, locate the stud in the wall. Position wall mounting bracket (B) on wood stud or wood post and mark the location of the four holes using a pencil or a marker (not included). WARNING: To reduce the risk of fire, electrical shock or pe ...

assembly (A) with the four holes in the center of the back cage (E). 7. 7 A E 2 A E Install four back cage screws (CC) into each of the four holes in the center of the back cage (E) to secure back cage (E) to motor on fan assembly (A). 8. 8 Replace set screw (G) at bottom of fan ...

from shaft on fan motor. 9 F 9. Place blade assembly (D) over motor shaft and lock pin, making sure to align gap on the blade assembly (D) with lock pin on motor. Using the Allen wrench (DD), turn preassembled set screw located on the blade assembley (D) clockwise to secure blade assembly (D) to fan motor. 10 ...

a three-prong grounded plug that must be inserted into a matching receptacle. Under no circumstances must the grounding prong be cut off the plug. Where a two-prong wall receptacle is encountered, it must be replaced with a properly grounded three-prong receptacle installed in accordance with th ...