Humminbird SOLIX Quick Start Manual

X-Press Menu to adjust the screen brightness, turn on/off night mode, etc. Open the Home Screen NOTE: To return to the previous view, swipe down with two fingers again. Press and hold the POWER key to power on/off. Tap the top, right corner of the status bar. Select Power Off. Press the HOME key. With a view displayed on-screen, swipe down. 532549-1_C SOLIX® QUICK START GUIDE ...

The Home screen is the main control center for your control head. Use the Home screen to access the control head settings, alarms, favorite views, and tools. The tools available on the Home screen are determined by the equipment attached to the control head network. Select a Tool, View, or Menu Use the touch screen, Joystick, or the ENTER key to make selections. Tap to Select Select Open OR status bar main menus tools bar favorite views OR Swipe Left or Right Use the Joystick ...

Close a Menu Tips for Using the Status Bar The status bar is located at the top of the screen. Turn the Rotary dial, or press and hold the ENTER key. Drag the slider, or press and hold the slider. Tap the view name or press the MENU key to open the X-Press Menu for the on-screen view. Tap the status bar or press the POWER key to open the Power X-Press Menu. touch menus change to match the on-screen view and status sensor status Press the EXIT key to close a menu or go back one level. Press and hold the EXIT key to close all menus. Tap the Back icon to go back one level. Tap the X icon to close a menu. 3 ...

Use the touch screen or the Joystick to open a view from the Favorites bar or the Views tool. Display the Next/Previous View Swipe the screen with two fingers to change the on-screen view. Or press the Rotary dial and select a view. Use the Views tool or Favorites bar to display a view. Swipe Left or Right 4 ...

The X-Press Menu displays menu options for the on-screen view, the selected pane, and the operation mode. 1. Single-Pane View: Tap the view name in the status bar, or press the MENU key. Multi-Pane View: Tap a pane, or press the PANE key to select a pane. Press the MENU key. 2. Select (Pane Name) Options > Preferences to change the appearance of the view. Select (Pane Name) Options > Overlays to display or hide information on the view. Press the PANE key to Select a Pane Tap to Select a Pane and the Menu Press the MENU key OR Using the X-Press Menu Swipe with one finger up/down or move the Joystick to scroll throu ...

Tap a position on the view, or move the Joystick. To open the Cursor menu, press and hold a position. Zoom In/Zoom Out Pinch out to zoom in, pinch in to zoom out, or press the +/- ZOOM keys. Cursor Menu Use the Cursor menu to mark a waypoint, create a route, open the Go To menu, or start a search. 6 ...

When you start your trip for the day using a Humminbird LakeMaster map card, it is important to note if the water level is higher or lower than usual. For example, if you know the lake is down 3 feet, set the Water Level Offset to -3. See your operations manual for details. 1. With a Chart View displayed on-screen, tap Chart in the status bar, or press the MENU key once. 2. Select Water Level Offset. 3. Tap the on/off button, or press the ENTER key, to turn it on. 4. Press and hold the slider, or turn the Rotary dial, to adjust the setting. NOTE: A Humminbird LakeMaster map card must be in ...

If the cursor is not active, the waypoint will be marked at the boat position. If the cursor is active, the waypoint will be marked at the cursor position. Activate Man Overboard Navigation As soon as you know you have a man overboard, press and hold the MARK/MAN OVERBOARD key. See your operations manual for details. Man Overboard Navigation Man Overboard navigation marks the approximate point where the person went overboard and starts continuous navigation toward the Man Overboard waypoint. 8 ...

1. Open the Cursor Menu: Press and hold a position on the chart. 2. Select Go To. 3. Select Quick Route. 4. Tap the chart in the positions where you want to mark a route point. Undo Last Route Point: Tap the Back icon. Cancel Route Creation: Tap the X icon. 5. To start navigation, tap the check icon in the status bar. Cancel Navigation: Tap Chart in the status bar. Select Go To > Cancel Navigation. Tap to Mark Route Points 9 ...

1. Press the GO TO key. 2. Select Quick Route. 3. Use the Joystick to move the cursor to a position or waypoint. Press the Joystick to mark the first route point. 4. Repeat step 3 to connect more than one route point. Undo Last Route Point: Press the EXIT key once. Cancel Route Creation: Press and hold the EXIT key. 5. To start navigation, press the ENTER key. Cancel Navigation: Press the GO TO key. Select Cancel Navigation. Mark Route Points Move Cursor Position Open Go To Menu Start Navigation cursor marking a route point route point 10 ...

Key Key Functions Press the POWER key to power on the control head. Press and hold the power key to power off. Press the ENTER key to start a command or turn on a setting. The ENTER key also opens the Info menu and the Cursor menu. Press the EXIT key once to close a menu, close a dialog box, turn off an alarm, or exit Cursor mode. Press and hold the EXIT key to close all menus at once. Move the Joystick to select a view, tool, or menu. Press the Joystick to open your selection. The Joystick is also used to move the cursor across the view and pan 2D/3D chart views. Turn the Rota ...

Contact Humminbird Customer Service in any of the following ways: Toll Free: (800) 633-1468 International: (334) 687-6613 E-mail: [email protected] Shipping: Humminbird Service Department 678 Humminbird Lane Eufaula, AL 36027 USA Our Web site, humminbird.com, offers in-depth information about all things Humminbird, along with technical support, product manuals, software updates, and a robust FAQ section. For more great content, visit: Facebook.com/HumminbirdElectronics Twitter.com (@humminbirdfish) YouTube.com/humminbirdtv ...