IBM SP3001 Getting Started Manual

Guide This document guides you through the process of connecting and performing the initial configuration of your IBM® Security SiteProtector™ System SP3001 appliance. Front panel Front panel features v A: LCD panel - use for initial network configuration, restarting or shutting down the appliance, ...

The steps you perform in the remainder of this document will provide you with remote network access to the appliance so that you can perform more advanced configuration tasks. You can find more advanced configuration information in the "Configuring" section of the SiteProtector online Help. Gather materials You must prepare some information ...

Follow this procedure to connect and power up the SiteProtector System appliance. Procedure 1. Connect both power cords to the appliance to prevent warning signals from sounding. 2. Connect the network to the management interface port 0 using the supplied Ethernet cable. Note that management port 1 should remain unused 3. Turn on the ap ...

2. Login to the IBM Security Download Center and click Download under the My software heading. 3. Under My Products, click IBM Security SiteProtector System. 4. Under Product Lines, click SiteProtector 3.1. 5. Click the Installation Packages link. 6. Download the Con ...

(2P) EC: L68523 (4L) Origin: MX *P46N5772* *2PL68523* *4LMX* Printed in Mexico IBM Security SiteProtector System SP3001 Getting Started Guide 5 ...