Icom IC-A200 Instruction Manual

Text of the manual

READ THIS INSTRUCTION MANUAL CARE-

FULLY before attempting to operate the transceiver. SAVE THIS INSTRUCTION MANUAL. This instruction manual contains important safety and operating instructions for the IC-A200. FOREWORD Thank you for purchasing the IC-A200 VHF AIR BAND TRANSCEIVER with lcom’s state-of-the-art technology. The IC-A200 can be

TABLE OF CONTENTS

IMPORTANT..................................................................i 3. RECEIVING AND TRANSMITTING................... ..6 I Receiving...................................... FOREWORD...................................................................i I Transmitting................................ .. ..6 ..6 CAUTIONS...................

I Front panel

06 FmLl §Li‘: O ‘\-L4 ‘wI-.1 ‘U—IQ >< “Q QQ wLIZ;I QQ wLII -I _— A comm MEMO L‘? cH 1.: 0 LARGE TUNING KNOB — Changes the STBY or USE window frequency in 1 MHz steps. (pgs. 3~4) — Selects a memory channel. (pgs. 7-10) — Programs a selected memory channel as a blank channe

I Function display

-eE03 1LII ‘U-I -*0 ><“'-Q Q‘ O :§ TLJ MEMO '1 i__‘____i O 6 (5) USE WINDOW Indicates the operating frequency that is used for trans- mitting and receiving. QTRANSMIT INDICATOR Appears while transmitting. (p. 6) © STBY WINDOW — Indicates the standing-by frequency which is used as the next opera

I Frequency selection

I STBY window frequency methods There are 2 ways to select a desired frequency. General frequency selection Select a desired frequency which is used for the next operating frequency in the STBY window. Then, ex- change the USE window frequency for the STBY window frequency. Refer to S

I Frequency exchanging

After selecting the STBY window frequency, push [4—>] to exchange the USE window frequency for the STBY window frequency. Frequency exchanging can also be performed remotely from the yoke-mounted frequency exchange switch. _§ __ "5!-'-I ‘Q vLII FQLI w2-"- wLII wLII Push “Q wII_| §gm IIIIwLII __ :§ 5!~'-I :1- w L..I NOTE: DO NO

I Frequency set example

The following is an example of how to select 126.125 MHz in the STBY window, and then transfer it to the USE window. Rotate clock- , (D wise. I I LI_| .11’ O I203 QLII O III QLII ,___ OFF PULL TEST Select 126.40 ® MHz. ‘Q ZZ QQ LI_| 1 QQI QL13 QLII QQ QII_| QLIII I III QLII ® Select 126.1 5 PMM MHz. QQ LI_|

Other Transceiver Manuals