Intellinet 524438 Quick Install Manual

Text of the manual

Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™

Wireless 150N USB Adapter, Model 524438. This quick install guide presents the basic steps required to set up and operate this device. For specifications and more detailed instructions, refer to the user manual 1) on the CD enclosed with this product; 2) on the Web site below; or 3) in

IMPORTANT: For proper operation, do not connect the Wireless 150N

USB Adapter to your computer before you install the software. If you do, wait for the Found New Hardware screen to display and click “Cancel”; otherwise, the installation process will likely be adversely affected. 1. Insert the included setup CD in the CD-ROM drive and start

3. On the second Setup Type screen (below), choose a configuration

tool. “INTELLINET Configuration Tool” is recommended, as it provides access to all adapter features. If you prefer to use the tool provided by Windows XP/Vista, select “Microsoft Zero Configuration Tool.” Choose either (the setting can be changed after the install), then click “Next

4. When the Ready to Install the Program screen displays, click “Install.”

NOTE: If the Found New Hardware screen displays again, wait a few moments and the Install screen will appear. 5. When the “InstallShield Wizard Complete” message displays, select “Yes, I want to restart my computer now” and click “Finish.” Wait for the computer to re

6. With the computer now

turned on, insert the Wireless 150N USB Adapter into an open USB 2.0 port. NOTE: You can also insert the adapter into the provided stand and connect the stand to the USB port of the computer. 7. With the Welcome to the Found New Hardware Wizard screen displayed (which is automatic when the adapter is connected to the computer), selec

8. When prompted with “What do you want the wizard to do?” select

“Install the software automatically (Recommended)” and click “Next.” 9. A status screen will display, indicating that the installation is in progress. No action is needed at this point. INTELLINET Wireless 150N USB Adapter 524438_02_QIG.indd 8 9/29/08 2:56:47 PM

10. When the Completing the Found New Hardware Wizard screen

displays, it indicates that the installation has been successfully completed and your Wireless 150N USB Adapter is ready for configuration. coNfigUrAtioN Once the installation is complete, you can configure the Wireless 150N USB Adapter to connect to a wireless access point (AP). The wireless con

Other Adapter Manuals