Junghans Mega 1000 J604.64 Manual 

Many congratulations on your purchase of a timepiece from Junghans. What began in 1861 with the founding of the firm in Schramberg quickly developed into one of the most fascinating success stories of the German watchmaking industry. While since that time the demands made of watches may have changed, the Junghans philosophy has always remained the same. Innovative flair and the constant pursuit of precision right down t ...

4. Functions 4.1 Time display modes 4.2 Additional functions 5. Description of the functions and their operation 5.1 Stopwatch with split function (chrono) 5.2 Countdown timer 5.3 Alarm 6. Reception indicator 7. Manual Synchronisation (Calling the transmitter) 8. Time zone adjustment/ 12-24 hour display / home time 8.1 Time zone adjustment 8.2 12-24 hour display ...

Cutting edge chronography. 5,000 years have now passed since the advent of chronography. Start ing with sundials and water clocks, advancing to mechanical clocks in the 13th century and then followed by quartz watches, chronography has now culmi- nated in the radio-controlled watches by Junghans. Radio-controlled watches by Junghans are always accurate and never require adjustment if reception conditions are adequate. Junghans rad ...

Junghans Mega 1000 will display the exact time when reception conditions are adequate. Junghans radio-controlled wristwatches automatically synchronise themsel- ves every day with the DCF77, WWVB, JJY40 and JJY60 time signal transmitters. If your Junghans Mega 1000 radio- controlled watch is unable to receive a sig- nal due to interference (e.g. thunder storms, electronic device ...

The fully automatic time synchronisation takes place daily using the DCF77 (Europe) transmitter with CET (Central European Time) at both 2:00 und 3:00 hours, as well as CEST (Central European Summer Time) at 3:00 und 4:00 hours depending on the current local time. With the transmitter WWVB (North America) and JJY40 respectively JJY60 (Japan) at 2:00 and at 3:00 hours depending on the current local time. The display s ...

Time display mode 2: Time display mode 3: Time Time / Day / Date / Time / Day / Date / Year Calendar week Time display mode 4: Time display mode 5: Time / 2nd time Time/ Transmitter indicator / Reception indicator T1 T4 T5 T2 T3 T1 T4 T5 T2 T3 T1 T4 T5 T2 T3 T1 T4 T5 T2 T3 T1 T4 T5 T2 T3 4.2 Additional functions The following functions can be selected one after the other using the T3 button. – Stopwatch with split function and ...

the split time. These are shown in the upper part of the display. Pressing T2 again shows additional split times. The last ten split times are always saved. The stopwatch continues to run when split times are being shown. After pressing T4 to stop the stopwatch, the split times that were saved can be shown by pressing T2. 5. Description of the functions and their operation 5.1 Stopwatch with split func ...

Press T3 until TIMER mode is selected. The timer is set using T1 (set+) and T2 (set–). Press the button briefly to adjust the time by the second. If you hold the button down the time changes quickly. The countdown timer is started/stopped with the T4 button. When the countdown timer is running the tag ”ON” appears above the TIMER menu item in the display. When the countdown timer reaches 00:00:00 an acoustic signal sounds. ...

repeating alarm (24h alarm) or as a single alarm. Proceed as follows to set the type of alarm: Make sure that your Mega 1000 is in ALARM mode. If this is shown in the display, press button T1 (set+) and T2 (set-) at the same time to start adjusting the alarm mode. Now press the T1 (set+) or T2 (set-) but- ton, to select the desired alarm mode. The selected alarm mode is displ ...

use of the T1 button. With the use of one of the buttons ranging from T2 to T5, it is possible to display the current time during the synchronising procedure by keeping the button depressed or, by pressing the T5 lighting button which will display the time for the duration of the illumination. Hereby, the current hour, minutes and seconds as well as weekday, day, month and year wi ...

mode 1). The display shows the time. T4 is used to adjust the time zone. When the time zone is adju- sted the main time display changes to show the time in this time zone. Press T4 for more than 3 seconds. The upper part of the display shows ”1. TIME”, the hour figure flashes and can be adjusted by the hour using T1 (set+) and T2 (set–). Where necessary the date is automatically adjusted at ...

Once the desired 12-24 hour time display mode has been set, press T4 to adjust the home time setting. This setting enables you to set the home time. This should correspond to the time zone where you spend most of your time and can be adjusted using T1 (set+) and T2 (set–). Press T4 to return to the normal time display mode. 9. Language selection (weekday indicator and date display) The language of the weekday indicator of your Junghan ...

The date can be displayed either in day-month for- mat or in month-day format. Press T4 to set the date format. The date format flashes in the upper part of the display (TA.MO. or MO.TA – German, DA.MO or MO.DA. – English and JO.MO or MO.JO – French) This can be changed using T1 (set+) or T2 (set–). Press T4 to return to the normal display mode. T1 T4 T5 T2 T3 T1 T4 T5 T2 T3 10. 2nd Time The 2nd time function enables you to s ...

After changing the battery, a restart is automatically carried out. After the battery has been inserted the indicator for the transmitter currently being sear- ched for will flash and the signal controlled second indicator will be displayed. All other displays will remain switched off for the duration of the synchro- nisation. The watch will start with the reception. After a few minutes, the watch, after successful ...

sted (hour, minute, second, 12-24 hour display, language, date display mode, year, month and day) flash one after the other in the display. When the hour is flashing it can be set to the correct value using T1 (set+) and T2 (set–). After setting the hour press T4 to set the minutes using T1 (set+) and T2 (set–). Press T4 again to select the seconds indicator, and then press ...

To prevent unintentional adjustment of the display, your Mega 1000 has a function that allows you to lock the operating buttons. This function is avai- lable in every time display mode (see chapter 4.1). Proceed as follows to activate or deactivate the button lock: Press the T5 button for more than 4 seconds. The CHRONO, TIMER and ALARM symbols disappear from the display. The button lock is now activa- ted. To deactivate, repeat the s ...

External influences can affect the watch’s waterproof qualities, which may let in moisture. We therefore recommend that you have your watch regular- ly inspected by your Junghans specialist. Other servicing tasks or wrist strap repairs should also be done by your Junghans specialist. Your watch is fitted with a quality wrist strap that has undergone multiple inspections in our factory. If, however, you decide to change the ...

Félicitations pour l’achat d’une montre Junghans. Ce qui débuta en 1861 à Schramberg avec la fondation de la société, s’est rapidement transformé en une histoire à succès sans précédent dans l’industrie horlogère allemande. Malgré que les exigences par rapport aux montres ne soient plus les mêmes, la philosophie Junghans ne s’est pas modifiée. L’esprit innovant et l’ambition de la précision j ...

2. Alimentation de la montre en énergie (pile) 3. Synchronisation horaire automatique 4. Fonctions 4.1 Modes d’affichage de l’heure 4.2 Autres fonctions 5. Description des fonctions et de leur commande 5.1 Fonction stop avec enregistrement des temps intermédiaires (chrono) 5.2 Fonction de décompte du temps 5.3 Alarme 6. Affichage de la réception du signal radio-piloté 7. Synchronisation manuelle (app ...