Kikusui TOS9200 Operation Manual

Mar. 2017 OPERATION MANUAL WITHSTANDING VOLTAGE/ INSULATION RESISTANCE TESTER TOS9200 Series TOS9200 TOS9201 DANGER This Tester generates high voltage. Any incorrect handling may cause death. Read Chapter 2 “PRECAUTIONS ON HANDLING” in this manual to prevent accident. Keep this manual near the tester for easy access of the operator. ...

ual Please read through and understand this Operation Manual before operating the product. After reading, al w ays k eep the manual nearby so that you may refer to it as needed. When mo ving the product to another location, be sure to bring the manual as well. If you fi nd an y incorrectly arranged or missing pages in this manual, the y will be replaced. If the manual it gets lost or soiled, a ne w cop y can be pro vided for a fee. In ...

INSULATION RESISTANCE TESTER Ver. 1.01 KIKUSUI ELECTRONICS CORP. TOS9201 AC/DC WITHSTANDING VOLTAGE / INSULATION RESISTANCE TESTER Ver. 1.01 KIKUSUI ELECTRONICS CORP. Interlock Function The first time the tester is turned on following delivery, the interlock function activates and testing is disabled. Before starting a test, read "4.3 INTERLOCK Connector" for the procedure for starting up the tester using th ...

• If the oper ator does not read the language used in this man ual, tr anslate the man ual into appropr i - ate language . • Help the oper ator in understanding this man ual bef ore oper ation. • K eep this man ual near the tester f or easy access of the oper ator . F or y our o wn saf ety (to a v oid electr ifi cation) While the tester is deliv er ing its test v oltage , ne v er touch the f ollo ...

Power requirements of this product have been changed and the relevant sections of the Operation Manual should be revised accordingly. (Revision should be applied to items indicated by a check mark .) Input voltage The input voltage of this product is VAC, and the voltage range is to VAC. Use the product within this range only. Input fuse The rating of ...

TOS9200/9201 For the saf e use and saf e maintenance of this pr oduct, the f ollo wing sym - bols are used thr oughout this man ual and on the pr oduct. Under stand the meanings of the symbols and obser ve the instructions the y indicate (the c hoice of symbols used depends on the pr oducts). Indicates an imminently hazardous situation which, if ignored, will result in death or ser ious injur y . Indicates that a high v oltage (o v er ...

ust be obser ved to a v oid fi re hazar d, electrical shoc k, accidents, and other failures. K eep them in mind and make sure that all of them are obser ved pr operl y . Using the pr oduct in a manner that is not specifi ed in this man ual ma y impair the protection functions provided by the product. Users • This product must be used only by qualified pers ...

TOS9200/9201 Installation • When installing products be sure to observe "Precautions for Installation" described in this manual. • To avoid electrical shock, connect the protective ground terminal to electrical ground (safety ground). • When installing products with casters, be sure to lock the casters. Relocation • Turn off the power switch and then disconnect all cables when relocating the prod- uct. • Use two or more per ...

Front panel and Rear panel • Before using the tester, be sure to read Chapter2 "Precautions on Handling" Before using the remote-control function, read the Operation Manual. Danger HIGH VOLTAGE terminal For connection, begin with the test leadwire of the low-voltage level. For connection, begin with the test leadwire of the low-voltage level. Deflected meter pointer means that the Tester is in “DANGER HIGH VOLTA ...

Safety Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - V Preface Outline - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P-1 Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ...

3.6.1 Settings on the IR1 screen - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -3-33 3.6.2 Settings on the IR2 screen - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -3-38 3.6.3 Settings on the IR3 screen - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -3-42 3.7 Connect ...

5.1.2 Settings on the TOS6200 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-1 5.1.3 Settings on the TOS9200 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-2 5.2 Starting a Test - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-4 5.3 ...

The TOS9200 can perform AC withstanding voltage testing and insulation resis- tance testing. The TOS9201 can perform DC withstanding voltage testing, in addi- tion to AC withstanding voltage testing and insulation resistance testing. Both can operate at up to 5 kVAC/100 mA (for up to 30 minutes) in AC withstanding voltage testing, and u ...

Features ■ Three testing functions – A C withstanding v olta ge, DC withstanding v olta ge, and insulation resistance tests The T OS9200 performs A C withstanding v oltage testing and insulation resistance testing. The T OS9201 conducts A C withstanding v oltage testing, DC withstanding v oltage testing, and insulation resistance testing. When connected to a DUT , the tester can perfo ...

■ D C w i t h s t a n d i n g v o l t a g e t e s t a t 6 k V ( m a x i m u m o u t p u t o f 5 0 W ) The T OS9201 can perform DC withstanding v oltage tests for a wide v oltage range of up to 6 kV (maximum output of 50 W and maximum duration of 1 minute). The tester is equipped with a stable, lo w-ripple DC/DC con v erter with a v oltage re gula - tion of 1 % or less. Fig.P-4 DCW Output V ...

■ Full y pr ogrammab le GPIB and RS-232C interfaces as a standar d f eature All functions e xcept for the PO WER switch, KEYLOCK, and program e x ecute (A UT O) functions, are remote-controllable. T est conditions such as the test v oltage, judgement v alue, and test time can be controlled remotely in A C and DC withstand - ing v oltage and insulation resistance tests. Measured v alues and measurement ...

ol function F or P ASS judgement in A C withstanding v oltage testing, the test v oltage can be decreased in increments. The v oltage f all time can be set to 0.0 s through 99.9 s at a resolution of 0.1 s and to 100 s through 200 s at a resolution of 0.1 s. ■ Disc har ge function Generally , DUTs contain capaciti v e elements. Therefore, DUTs remain char ged immediately after a DC withstanding v oltage test ...

olta ge monitoring function When the output v oltage de viates from ± (10 % of the setting +50 V), the monitor - ing function acti v ates to suspend the test, ensuring highly reliable testing. ■ High operability The T OS9200/T OS9201 is easy to operate, allo wing the operator to start using it without dif fi culty . Featuring the T OS5000’ s high operability , the tester displays the primary test conditions on t ...

The rear panel includes a high-v oltage output terminal to be used for an optional high-v oltage scanner . This terminal also f acilitates wiring when you mount the tester on a rack. ■ Small and lightweight F or A C withstanding v oltage testing, the T OS9200/T OS9201 is pro vided with an output po wer supply 2.5 times that of Kikusui’ s con v entional testers, in addition t ...

s withstanding v oltage tester to output a test v oltage. It is designed to pre v ent the unintended output of a test v oltage. T o output a test v oltage, hold the slide le v er on the test-probe grip and pull the trig - ger with one hand, then press the switch on top of the probe using the other hand. When you release either hand, th ...