L-Acoustics KS28 Rigging Manual
Text of the manual
Document reference: KS28 rigging manual (EN) version 2.0
Distribution date: February 24, 2017
© 2017 L-Acoustics. All rights reserved.
No part of this publication may be reproduced or transmitted in any
form or by any means without the express written consent of the
publisher.
Contents
Safety................................................................................................................................................................ 4
Instructions................................................................................................................................................4
Symbols.................
Inspect the product before operation.
If any sign of defect or damage is detected, immediately withdraw the product from use for maintenance.
Never incorporate equipment or accessories not approved by L-Acoustics.
Read all the related PRODUCT INFORMATION documents shipped with the products before
exploiting the system.
Do not store
Do not expose the product to extreme conditions.
Do not expose the product to rain or sea spray.
Do not expose the product to moisture (mist, steam, humidity, condensation…) or excessive heat (direct sun,
radiator…) for a long period of time.
Contact L-Acoustics for advanced maintenance.
Any unauthorized maintenance operation will void the product
Thank you for purchasing the L-Acoustics KS28.
This document contains essential information on rigging the system properly.
As part of a continuous evolution of techniques and standards, L-Acoustics reserves the right to
change the specications of its products and the content of its document without prior notice. Please
check www.l-acousti
Flyable subwoofer 2 x 18''
Rigging elements
KS28-BUMP
Lifting beam for ying up to 16 x KS28
LA-SLING2T
1m chain sling with two-leg bridles rated 2 tons
KS28-PLA
Removable front dolly on wheels for 1 x KS28
KS28-COV
Protective cover for 1 x KS28
KS28-CHARIOT
Chariot for up to 4 x KS28
KS28-CHA
The KS28 rigging system complies with 2006/42/EC: Machinery Directive. It has been designed following the
guidelines of BGV-C1.
2006/42/EC: Machinery Directive species a safety factor of 4 against the rupture. The own deployments described in
this manual achieve a safety factor of 5 or higher.
R