Midland BTX1 FM Product Manual

Main features � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ...

MIDLAND BTX1FM Basic intercom system The BTX1FM is an intercom communication system for motorcyclists. The design is slim and aerodynamic, and all main functions are easy to operate with the three big buttons. The BTX1FM is fixed to the helmet using either the adhesive plate or the screw mounting clamp. With an audio kit and ultra slim speakers, you can enjoy high quality stereo music while riding. Main features › ...

After the initial charge it takes approximately 6 hours for a full charge� Attention: Every time the mini USB recharging plug is inserted (or detached), the device is automatically turned off. To use while charging, turn the device on with the plug already inserted. Unit and attaching system BTX1FM description The BTX1FM has five buttons on the front; the three main buttons are multi func- tion buttons: “Forward� ...

Description of the installation brackets The Midland BTX1FM can be attached to the helmet in two different ways: The plate with bi-adhesive strip, or the clamp� These methods allow you to safely attach the BTX1FM unit onto your helmet and remove it at any time in order to recharge or store it� Plate with bi-adhesive strip The mounting plate has a bi-adhesive strip on one of its sides� To fix the plate in place, ...

Pairing two BTX1FM units If the model purchased is BTX1FM Twin, the two units supplied in the box are already paired and ready to use� The following procedure does not need to be performed� If the devices are not part of the same kit, or the units have been purchased separately, you need to pair them in order to use them together� Pairing the BTX1FM to another BTX1FM unit First enter setup mode: 1� Turn off ...

When successfully paired (no red/blue flashing light), open the intercom communication on the BTX1FM by following the instructions for “Manual activation;” on the other intercom press the phone redial button� Attention: When using this configuration, the other intercom (non-Midland brand) will not be able to pair to a phone. Talk 2 All - Universal Intercom Non-Midland brand device Pairing the BTX1FM to Bluetoot ...

Making a call in Phone mode only There are several ways to make a call� From the phone keypad: Dial the number on the phone keypad: Press “Send” on the phone� To redial the last number: Press the “Forward” button for 3 seconds in order to redial the last number (you will hear an audible confirmation tone)� To make a voice call: Briefly press the “Forward” button� If your phone supports voice calls ...

6� Follow the pairing procedure of your GPS� If a pin code is requested you must enter “0000” (four zeros)� 7� When successfully paired, the Blue LED light of the unit will be on for one second and then the unit will exit setup mode and switch to the working mode (the Blue LED light will start flashing)� When you pair the GPS to the “Volume +” button, you lose the ability to pair a phone to the BTX1 ...

Using the wired audio input Your Midland BTX1FM is also supplied with a wired audio input (AUX) that can be used to connect an audio source like an iPod (or any other MP3 Player) or a GMRS trans- ceiver for group communication or to increase range� Listening to music To listen to music from the wired input (AUX), connect the audio source using the optional AUX cable� The volume buttons cannot be used to adjust th ...

Adjusting the sensitivity of the microphone (VOX) First enter setup mode: 1� Turn off the unit� 2� Press and hold down the “Middle” button about 7 seconds until the Red LED light is on permanently� 3� Your BTX1FM is now in setup mode� 4� Tap the “Back” button and the Red LED light changes to a steady Blue� 5� Now press “Volume +” or “Volume -“ to adjust sensitivity� Every time you ...

LIMITED WARRANTY (United States and Canada) Subject to the exclusions set forth below, Midland Radio Corporation will repair or replace, at its option without charge, any Midland Bluetooth Intercom which fails due to a defect in material or workmanship within Two Years following the initial consumer purchase� This warranty does not apply to water damage, battery leak, abuse or misuse of unauthorized accessories, un ...

Check out these and other great products at midlandusa.com CB Radios Emergency Crank Radios Marine Radios HD Wearable Video Cameras Bluetooth Headsets Weather Radios 2-Way Radios ...

Accessories Order Form Please send Money Order or fill in the Visa/Master Card information and mail to the address below� Please DO NOT send cash or checks� Make Money Order to Midland Radio Corporation� Name:____________________________________________________________________ Address: __________________________________________________________________ City: ______________________________State: ___________ Zip ...