Minipa MTR-1522 Instruction Manual
Read Online
Read the Minipa MTR-1522 Instruction Manual online using the built-in PDF viewer.
Key Pages of Document
Instructions Manual Manual de Instrucciones * Imagem meramente ilustrativa./Only illustrative image./ Imagen meramente ilustrativa. TelurímetroDigital Digital Earth Meter MTR-1522 TEST DIGITAL EARTH TESTER LIGHT/LOAD HOLD/SAVE OFF OFF EARTH VOLTAGE 40 400 4000 MAX 400V CAT III 600V MTR-1522 E V P C ...
03 4) RULES FOR A SAFETY OPERATION 04 5) INTERNATIONAL ELETRIC SYMBOLS 05 6) DEVICE DESCRIPTION 06 7) DEVICE CONFIGURATION 07 A. Battery level 07 B. Probes conection ...
The earth meter MTR-1522 is a macromachined device with high precision and reliability. Able to measure the earth resistence of eletric cables, eletric instalations and lightning rod equipaments. Beyond that, is able to measure the earth voltage. Obs: this device should not be use in outdoor environment that possess risks, like rain, lightning incidences, etc. 2) ACCESSORIES After receive your instrument, please, check for the followin ...
This instructions manual contains orientations to the user and safety instructions for device handle. Please, read the manual before handle with the device. ●� Before�use�the�device,�please,�understand�this�instruction� manual content. ●� Keep�the�instructions�manual�in�an�easily�accessible�place�� for a possible consultation during operation. ●� When�using�the�instrument,�foll ...
The symbol “ ” has three meanings in this manual. The user must look carefully for the symbol “ ” during operation: Danger - Identify conditions and actions that may result risk or even death. Warning - identify conditions and actions that may result risk or even death. Caution - identify conditions and actions that represents damage to the device. DANGER ●� Do�not�use�the�device�in�explosive�envir ...
to dry the device to proced with the exchange. ●� Assure�that�the�device�is�off�for�battery�exchange�or�open� the battery content. CAUTION ●� Make�sure�that�the�terminals�of�the�probes�are�connected�to� appropriate terminals of the instrument before performing a measureme ...
� ...
A. Battery Level Select� the� function� EARTH� VOLTAGE� ou� EARTH� RESISTANCE.�If�the�battery�indication�is�“ ” means low battery and it need to be exchange, otherwise, the device will not operate correctly. Battery Symbol Battery Voltage ≥�8,2V 7,8V ~ 8,1V 7,4V ~ 7,7V 7,1V ~ 7,3V ≤�7,0V B. Probes Conection Make sure that all the probes are tightly conected to the device input terminals. A lo ...
the highest voltage between E and C must be 50V AC. Do not touch the external part of the probes or the au- xiliary stakes, to avoid eletric shock danger. A. Precision Measure Place both stakes in the ground. The smallest distance between the electrode (E), the catheter (P) and the auxiliar stake�(C)�must�be�between�5�~�10�meters,�like�figure�2. � ...
9 Note ●� Check�the�ground�humid�where�the�auxiliary�stakes�will� be�placed.�If�the�groud�is�to�dry,�moist�it�a�little.�Rocky� and�sandy�soils�alson�need�to�be�moisted�before�testing. ●� If�the�test�site�is�in�an�urban�center�covered�in�concrete� and�difficult�access�to�the�stakes,�use�two�steel�plates� 25cmx25cm(or�the�stakes�pre-existin ...
Select�the�function�EARTH�RESISTANCE�4000Ω�(maximum� range), press the button TEST then the display will show the earth resistance value. If the value of the resistence is lower than�400Ω,�select�the�function�400Ω�then�the�display�will�show� the earth resistance value. If the value of the resistence is lower�than�40Ω,�select�the�function�40Ω�then�the�display�will� ...
Danger To avoy eletrical shock risks, be careful when using a grounding point of commercial electric power systems as a point of reference test. This method can be used when there is not possible to use the auxiliary stakes. The two wire test method (using the terminals E and P/C) can be applied in grounding of build- ings, grounding wire, showers, etc., using the groundin ...
●�Auto Shutdown The device will turns on when the buton is pressed and some function is selected. The auto shutdown happens after 10 minutes to save battery (except when the device is realizing ground resistance tests). ●�Backlight When performing the tests in poorly lit areas, you can use the backlight of the display. Pressing�the�button�“LIGHT/LOAD”,�the�display�backlight�will� light up and the correspo ...
If�you�want�to�return�to�previous�data,�press�“HOLD/SAVE”� once�(in�this�case,�“HOLD/SAVE”�and�“LIGHT/LOAD”�are� working as “up” and “down”). � To�disable�the�function,�press�“LIGHT/LOAD”�for�two�seconds. 3.�Erase�the�saved�data:� ...
●�Precision:�±�(a%�read�+�b�digits),�Guaranteed�for�1�year. ●�Operation�Temperature:�20°C±5°C. Relative�humidity:� ≤�75%. The� specification� applies� between� 10%� to� 100%� of� the,� measurement range. A. Ground Voltage Ranges Resolution Accuracy 400V 0,1V ±(1,0%+6) Observations: ●Average�response. ●�Frequency�Response:�50Hz/60Hz. ●�Overload�Pr ...
When the low battery indication appear on the display, per- form the replacement immediately as described bellow: 1. Turn Off the device and remove the probes. 2. Remove the screw from the bottom and open the battery compartment. 3. Replace all the 6 batteries for new ones. 4. After the replacement, replace the battery compartment and�the�screw�firmly. Remove all the batteries if the instrument is not used f ...
specialized technical and authorized by Minipa to perform the service. ...
failure occurs under normal use, this product will be repaired according to warranty conditions and limitations. WARRANTY SERIAL Nº MODEL MTR-1522 1- The warranty 2- It will be repaired free of charge in following cases: A) Manufacturing defects or damages occurred under normal use of instrument within the warranty period. B) The services to correct the failure will be done ...
The registration can be made by following ways: -�Mail:�Send�a�copy�of�warranty�certificate�correctly�filled to the following address. Minipa�do�Brasil�Ltda. Att: Serviço de Atendimento ao Cliente Av.�Carlos�Liviero,�59�-�Vila�Liviero CEP: 04186-100 - São Paulo - SP -�Fax:�Send�a�copy�of�warranty�certificate�correctly�filled by fax number 0xx11-5071-2679. - e-ma ...
Av.�Carlos�Liviero,�59�-�Vila�Liviero 04186-100 - São Paulo - SP - Brasil MINIPA ELECTRONICS USA INC. 10899�-�Kinghurst�#�220 Houston�-�Texas�-�77099�-�USA MINIPA DO BRASIL LTDA. Rua Dna. Francisca, 8300 - Módulo 4 Módulo A - 89219-600 - Joinville/SC - Brasil DO BRASIL LTDA. ALL RIGHTS RESERVED / TODOS LOS DERECHOS RESERVADOS TODOS OS DIREITOS RESERVADOS / ...
