Mitox CS62 Select Operator's Manual

CS62 / CS64 SELECT Chainsaw www.mitox.co.uk Read this manual carefully before operating the machine Original Instructions Version July 16 CS62-64_130716 ...

2 Original Instructions Version July 16 CS62-64_130716 Component Location 1. Chain brake 2. Recoil handle 3. Air cleaner cover 4. Choke knob 5. Throttle interlock 6. Rear handle 7. Throttle lever 8. Decompressor button 9. Engine switch 10. Fuel tank 11. Oil tank 12. Front handle 13. Saw chain 14. Gu ...

3 Original Instructions Version July 16 CS62-64_130716 Warnings in the Manual This mark indicates instructions which must be followed in order to prevent accidents which could lead to serious bodily injury or death. This mark indicates instructions which must be followed or it leads to mechanical failure, breakdown, or damage. Thi ...

4 Original Instructions Version July 16 CS62-64_130716 Directive 2000-14/CE. Guaranteed noise levels Danger: Risk of intoxication Danger: Risk of fire or explosion Hot surface, risk of burn Explanation of Symbols on the Machine For safe operation and maintenance, symbols are carved in relief on the machine. STOP STOP PULL STOP PUL ...

5 Original Instructions Version July 16 CS62-64_130716 )) ) ) ) H CHOKE OPERATION Starting mode when the engine is hot. Position: Upper-right of the air cleaner cover Starting mode when the engine is cold. Position: Upper-right of the air cleaner cover HIGH-SPEED ADJUSTMENT SCREW Position: Left side, screw under “H ...

6 Original Instructions Version July 16 CS62-64_130716 This Chainsaw is equipped with extremely an extremely sharp blade, always wear sturdy gloves when handling the blades and fit the safety guards when not in use. When using this Chainsaw for the first time, take it to a wide, clear, open space, start the engine, and practice ha ...

7 Original Instructions Version July 16 CS62-64_130716 Work Clothing & Safety Equipment When using this product, you should wear the correct Personal Protective Equipment. • Helmet • Safety goggles / face protector • Ear protection • Thick work gloves • Non-slip, steel toe capped work boots • Strong, durabl ...

8 Original Instructions Version July 16 CS62-64_130716 Before starting work all components of this product should be checked to make sure that it is in proper working order. Ensure there are no loose screws or bolts, fuel leaks, ruptures, dents, broken guards or any other problems which might affect the safe operation. Keep all pa ...

9 Original Instructions Version July 16 CS62-64_130716 • Maintain full engine speed when cutting. • Never allow other persons to come within the work area as doing so might expose them to danger. • If a branch or other object gets caught in the blades during operation, always turn off the engine before removing the object. � ...

10 Original Instructions Version July 16 CS62-64_130716 In the Box A standard saw unit package contains the items as illustrated. 1) Power unit 2) Plug wrench 3) Bar Protector 4) Guide bar 5) Saw chain Not pictured 6) Owner’s manual 1 2 3 4 5 ...