MTS Systems CMS-50FF Instructions Manual

CMS-50FF Instructions for CMS-50FF Pulse Oximeter Dear users, thank you very much for purchasing the Pulse Oximeter. This Manual is written and compiled in accordance with the council directive MDD93/42/EEC for medical devices and harmonized standards. In case of modifications and software upgrades, the information contained in this docum ...

CMS-50FF CONTENTS 1Safety ..................................................................................................................................................... 1 1.1Instructionsforsafeoperations ........................................................................................................... 1 1.2Warning ........ ...

CMS-50FF 1 Safety 1.1 Instructions for safe operations  Check the main unit and all accessories periodically to make sure that there is no visible damage that may affect patient’s safety and monitoring performance about cables and transducers. It is recommended that the device should be inspected once a week at least. When there is o ...

CMS-50FF  As to the fingers which are too thin or too cold, it would probably affect the normal measure of the patients' SpO2 and pulse rate, please clip the thick finger such as thumb and middle finger deeply enough into the probe.  The pulse oximeter can be used to adult or infant. Whether the device is used to adult or infant, it ...

CMS-50FF 2.2 Major applications and scope of application The Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger. The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports and it is not rec ...

CMS-50FF 4 Technical specifications 4.1 Main performance A. SpO2 value display B. Pulse rate value display, bar graph display C. Pulse waveform display D. Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage E. The display mode can be changed F. Screen brightness can be changed G. A p ...

CMS-50FF 5 Installation 5.1 View of the front panel Figure 2. Front view Figure 3. Left and right view 1. Probe jack: It is used to connect a SpO2 sensor to measure the oxygen saturation and pulse rate. 2. USB port: It is used to connect a personal computer to export the trend data or charge the lithium battery via a data line. 3. Chargin ...

CMS-50FF Figure 3. 5.3 Accessories A. a wristband B. a User Manual C. a power adapter D. a data line E. a disk (PC software) F. An adult-oximeter probe（Model:CMS04） An infant-oximeter probe (May purchase selectively) 6 Operating Guide 6.1 Application method A. Install the wristband according to the instructions of chapter 4.2. a) ...

CMS-50FF Figure 4. （Actual probe may be different with the probe as figure 4,please accept the actual probe with the device ） Attention: CLICK = short press of power button and PRESS = prolonged push of power button (1sec) B. Change display direction On the measuring interface, enter the clock interface by Click the button, and then ...

CMS-50FF Figure 5. Main Menu Interface a) Backlight adjustment On the main menu interface, Click the button to select “Brightness”, Press the power button and hold to adjust the backlight brightness. b) Alarm setting On the main menu interface, click the button to select “Alarm”, Press the power button (1sec) to enter the alarm ...