Bematech LR200M Operation & User’s Manual

1 Introduction .......................................................................................... 2 1.1 Safety Information ......................................................................................... 2 1.2 Usage Notice ................................................................................................... 2 1.3 Storage Notice ............................................................................... ...

committed to continuously improve product quality and provide better after-sales service. In order to take full advantage of our devices, we strongly recommend that you take the time to read this manual before diving into software solution. Note: Information in this manual may change without prior notice. 1.1 Safety Information (1) This printer can only use ba ...

(1) The printer should be stored in the environment where the temperature is -20°C to 70°C and relative humidity is 5% to 95%. (2) If the printer is to be stored for a long time, please take out the battery and stored it separately, otherwise it may result in the battery lose efficiency and may even cause leakage that damage the printer. (3) Do not store the thermal paper in a high temperature or direct sunlight environment. Seal off ...

with metal materials, such as necklace, hairpin etc. Short circuit in the battery may cause excessive current, then results in overheating, burning and/or explosion. (9) Do not drop the battery and avoid physical damage. If the safety device in the battery is damaged, charging of the battery would cause abnormal current and/or voltage that leads to overheating, burnin ...

compatible with most point-of-sale systems on the market. The LR200M portable printer optimizes the mobile checkout process and helps accelerate business at the Point of Sale. The printer is equipped with both Bluetooth and WiFi interface, enabling it to work with POS applications designed for either wireless communications. The rubber protection and non- ...

2. Feed Key 3. Battery indicator 4. Power Key 5. Printer top cover 6. USB interface connector 7. Power supply connector 8. Error indicator 9. Printer body 10. Transparent cover 11. Cover opening lever 12. Battery 2.2 Accessories Battery Power Charger Paper Roll CD-ROM Carrying belt clip USB Cable ...

(1) Battery Installation 1. As shown in the picture, put battery into the battery compartment. 2. Press the battery down until it is locked into the battery compartment. (2) Paper Roll Installation Transparency cover Battery y Cover lever Press on both sides ...

2. As shown in picture, place the paper roll in the printer. Note the correct direction of paper, otherwise the printer will not work properly. 3. As shown in picture, pull out a length of paper extending it out of the paper roll compartment. 4. Make sure that the paper roll is properly aligned and close the cover. 3.2 Basic Functions (1) Power On Under power off status, press and ke ...

LED) turns on, it means the printer is going to power off. Please change the battery or recharge it. For recharging steps, please refer to (5) below. (2) Change font size Under power off status, press and keep holding "POWER" button. The printer will be powered on with a short beep sound. If the button is kept holding, it will make a long beep sound, then follow by group ...

stay on. The printer can also be charged via USB port of host computer. However, the battery cannot be recharged using power adapter and USB at the same time. Note that charging through USB port will require longer charging time. Normally, the battery can last for printing 100 meters or 3 hours. This parameter is only for reference. The capacity of the battery would decr ...

1. Print a self-test page [see 3.2 (4) above] and turn on power of printer. 2. In host device, search for the external bluetooth device to pair. 3. If there is more than one bluetooth device found, select the printer device corresponding to EDR NAME (for Windows and Android) or BLE NAME (for iPad/iPhone) shown on the self-test page. 4. For EDR, Input password “0000” and finish the pairing. Notes: 1. Please refer to host devic ...

Off Normal operation. Number of LEDs indicates battery level On 1 to 3 LEDs on On Abnormal Off Off Slow flash Standby mode Off Off Off Power off 3.5 Preventive Maintenance This printer has been developed to have a long life expectancy with no replacement of components and minimum user interference. But printer lifetime is highly influenced by the following factors: paper quality, regular preventive maintenance, environmental conditions ...

(4) Although the printer is designed to withstand drops, it is still advisable to avoid dropping the printer. To carry the printer around safely, attach the printer to the supplied leather carrying belt clip and secure to the waist belt. (5) To extend the battery life, avoid over discharge of the battery. Recharge the battery as soon as possible when battery level is low. ...

The mobile printer comes with a configuration software for Windows to help configuring the printer. The utility can work through COM port (USB virtual COM port or Bluetooth virtual COM port) or Ethernet (WiFi interface). 4.1 Basic settings 1. Code page: Select default code page. 2. Density: set printing density if necessary. 3. Font: select default font size. 4. Auto standby time: set time out value to go into standby m ...

Note that USB connection should be used for setting WiFi parameters as Ethernet connection is not established before these parameters are set. 1. SSID: Set SSID of wireless network to be connected. 2. Mode: Set Station mode or Access Point mode. 3. Encryption modes: Set encryption mode according to network requirements. 4. IP: Set static IP address for the printer. 5. Print current setting: print out current WiFi configurations. 4.3 Bl ...

printer. For every problem there is a possible cause and a suggested procedure to solve the problem. Problem Possible Cause Procedure The printer does not turn on. The battery charge level is too low. Recharge the battery. Possible problem with battery contact. Check conditions of the battery contacts. Clean and retry. Battery is at end of life. Replace ...

printer. Paper jam CAUTION! Do not touch the print head; let it cool down before touching, as it can be very hot after printing. Switch off the printer and open the cover. Remove the crumpled paper from the printer and install a new paper roll. If necessary, remove the rest of the disrupted paper. ...

Resolution 203 dpi (8 dots/mm) Paper Width 56 mm Printing Width 48 mm Paper Roll Diameter 40mm max Paper Thickness 60 to 80 m Character Font ASCII Font A: 12x24 ASCII Font B: 9x24 ASCII Font C: 9x17 ASCII Font D: 8x16 Characters per Line Font A: 32 Font B: 42 Font C: 42 Font D: 48 Printer Density 384 dots/line Printing Speed 80 mm/s NV Bitmap Flash 64Kb Receipt Buffer 8Kb LIFE SPAN Pr ...