Bewator Bewacom BM3 Technical Manual

Text of the manual

Copyright © January 2001 Bewator AB, Solna, Sweden.

Material from the Bewacom Technical manual may only be copied with the consent in writing of Bewator. Bewator reserves the right to alter both the content of the manual and the design of the product without notice. Document no: 80642-2 Bewator AB are parts of Bewator Group, which develops and markets a com

Bewacom Technical manual

3 Contents WHAT IS BEWACOM?........................... 5 How Bewacom works...................... 5 Points to remember ......................... 6 Time control of the access codes..... 6 Monitoring camera.......................... 6 Limitations ....................................... 7 Requirements for connecting Bewacom to a telephon

Bewacom Technical manual

Extending the calling time 10 times19 Time control of the telephone opening function ............................ 20 Background lighting...................... 21 Internal sounder ............................ 22 Possibility to call the Bewacom .... 23 ”Hotline” ........................................ 24 Erasing the memory .....

Bewacom Technical manual

5 What is Bewacom? Bewacom is a door telephone which can be directly connected, like an extension, to an internal telephone system (PABX). Using the Bewacom, visitors may call any telephone connected to the telephone system. The person answering the telephone can talk to the visitor and open the door from the extension telephone. Bew

Bewacom Technical manual

Points to remember Bewacom only allows communication in one direction at a time. Each person must speak in turn for satisfactory communication. Time control of the access codes The access codes can be time controlled from external time clock(s) connected to the Bewacom. For example, the cleaning staff code could only be valid cert

Bewacom Technical manual

7 Limitations Bewacom cannot normally call extensions beginning with 0 or extensions consisting of more than 4 digits. If the installation requires alterations in these limits, contact Bewator. Requirements for connecting Bewacom to a telephone system An analogue extension (two wires) must be used for the connection of Bewacom. The t

Bewacom Technical manual

Installing Bewacom Install the Bewacom at a height of 120–140 cm (from the floor to the bottom edge of the Bewacom). To cater for disabled persons, a suitable height is approximately 95 cm. 1 Open the Bewacom with the key supplied. The lock is located on the front. 2 Fasten the back plate against the wall, using three screws as s

Bewacom Technical manual

9 3 Unless the unit is already mounted on a metallic earthed surface, earth the back plate. Use a separate cable to the earthing point. Make sure the front and back plate are connected with the internal strap. 4 Fit the front and check that the Bewacom is securely fastened.

Bewacom Technical manual

Installation SW1 9 8 7 6 CAMERA TAMPER 0V EXIT TELE 2 1 12-24V LOCK 13 12 11 10 15 14 1 2 3 4 5 2 + 4 1 5 6 7 8 3 9 10 12V 24V 11

Other Intercom System Manuals