Antec Fusion 430 User’s Operation & User’s Manual
Text of the manual
Fusion 430 /Fusion Black 430
User’s Manual
Manuel de l’utilisateur
Anwenderhandbuch
Manuale per l’operatore
Manual del usuario
পᡅ䂀ᯢ
TM
Media Components
At Antec, we continually refine and improve our products to ensure the highest
quality. As such, it’s possible that your new case may differ slightly from the
description in this manual. This isn’t a problem; it’s simply an improvement. As of
the date of publication, all features, descriptions, and illustrations in this manual
are correct.
Fusion 430
The Triple Chamber structure
Upon opening the top panel, you will find that the case is divided into three chambers
– the power supply chamber, the motherboard chamber and the HDD chamber.
This triple chamber structure isolates the heat and noise within each chamber,
resulting in much quieter and cooler operation than a traditional desktop case design.
I
reversing the connection. For more info on connecting LEDs to your motherboard,
see your motherboard manual.
5.
The Hard Drive LED (labeled HDD LED) connects to the hard drive activity header.
Power Supply 3-Pin Fan Signal Connector
A three-pin fan signal connector with blue and black wires is available to connect
the power supply to one of your motherboar
FireWire port to an IEEE 1394 add-on card that comes with an external-type IEEE
1394 connector, you will need a FireWire Internal Adapter. To order one, please
visit Antec’s web store at http://www.antec.com/StoreFront.bok and search for
part number 30031. This adapter will allow you to connect the front IEEE 1394
port to the external-type connector.
Pin
1. Make sure the power supply is off and unplugged before installing any hardware.
2.
Connect the 3-pin power cable from the display to the 3-pin connector on the
24-pin ATX main power connector of the power supply. Note: If you choose
to swap the included power supply with another power supply, please call
Antec Customer Service to purchase a special 2
Find a 4-pin molex or SATA connector on the power supply and connect it to
the power connector on the device.
Cooling System
The 120mm TriCool™ fans
The Fusion 430 comes with two 120mm TriCool™ fans preinstalled at the side of
the case inside the motherboard chamber. These two fans are preinstalled at the
side of the case next to the CPU for effecti
When used with the CPU Air Guide, fresh air from the rear air intake can be
directed to the CPU cooler to enhance the CPU cooling. The CPU Air Guide can
be adjusted by adding or removing stacking sections to best suit different motherboard
CPU positions.
The Power Supply Air Intake
There are vents on the left side of the case to bring cool air into the po