Anthem Audio Sonic Frontiers SFL-1 Owner's Manual
Text of Anthem Audio Sonic Frontiers SFL-1 Owner's Manual
O WN ER ’ S M A NU A L
T H E S O N I C F R O NT I E R S S F L - 1 & S F L - 1 S IG N A T U R E P R E A M P L I F I E R
Anthem Audio Sonic Frontiers SFL-1 A-Selector Switch - This knob is turned to select an Input (P)
through (S). The Selector Switch is bypassed when the SFL-1 is in
the Direct mode as selected by the Direct/Normal Switch (B).
B -Direct/Normal Switch - When in the D I R E C T position, this
toggle switch selects the Direct Input (O) from a preferred
source, allowing the source signal to bypass all unnecessary
control functions. The signal is only affected by the Mute (G),
the Volume Control (
J - Detachable Power Cord Socket - Plug the Detachable
Power Cord into this socket (see Figure 1). The SFL-1 is factory
set for the correct operating voltage for the area in which it is
sold (see shipping box for voltage setting). If a different operat-
ing voltage is required, please contact an authorized Sonic
Frontiers dealer, distributor or the factory directly.
K -AC Line Fuse - This is the AC fuse socket. The fuse may be
accessed with a small flat-bl
Anthem Audio Sonic Frontiers SFL-1 Figure 2 - Tube pin alignment with the socket.
W A R N I N G - D I S C O N N E C T the AC Detachable Power Cord from
the SFL-1 and wait 5 minutes b e f o r e removing the chassis cover.
Note the larger space
between two of the pins and
holes for proper alignment
of tube and socket.
INSERTION OF THE TUBE
The SFL-1 comes with a 12AT7A (Ei) tube and the Signature
model with a CV4024/M8162 tube, individually boxed and
bagged along with a cotton glove, screwdri
To record from a source, place the Tape/Source Switch (C) in the
SOURCE position and commence recording. To play back a tape
recording, place the Tape Source Switch in the TAPE position.
Muting the SFL-1 Preamplifier is achieved by placing the
Mute/Operate Switch (G) in the MUTE position; the output sig-
nal is then cut off. To resume listening place the switch in the
OPERATE position.
The mono/stereo function is controlled by Mono/Stereo Switch
(F). When
SFL-1 PLACEMENT FOR PROPER VENTILATION
Allow at least 4” (15 cm) of clear space above the SFL-1 chas-
sis for proper ventilation, making sure the air vent slots in the
chassis cover remain unobstructed. Also, be sure that the SFL-1
Preamplifier is placed on a secure, hard, and level surface.
SAFETY INSTRUCTIONS
1. Ventilation - Although your SFL-1 Preamplifier generates only
nominal heat in use, be sure that the ventilation slots in the top
cover have at
This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompany-
ing the appliance.
SFL-1 & SFL-1 SIGNATURE TECHNICAL SPECIFICATIONS
Frequency Response
2 Hz
We at Sonic Frontiers are sure that you will derive many years
of listening pleasure with your new SFL-1 Preamplifier. This
Owner’s Manual contains important information regarding the
operation and care of the SFL-1. Be sure to read this manual
carefully and follow these instructions in order to keep it looking,
operating and sounding its best.
2790 Brighton Road, Oakville, Ontario, Canada L6H 5T4 Telephone: (905) 829-3838 Facsimile: (905) 829-3033
S