Digisol DG-WM2005SI Quick Installation Manual

Text of Digisol DG-WM2005SI Quick Installation Manual

DIGISOL is a trademark of Smartlink Network Systems Ltd. All other

trademarks are the property of the respective manufacturers. Copyright Copyright 2014 by Smartlink Network Systems Ltd.All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or

The following items should be present in your package:

Make sure that the package contains above items. If any of the listed items is damaged or missing, please contact your retailer immediately. Product Overview Product Features DG-WM2005SI Ceiling Mount Access Point DC 12V Power Adapter Patch Cord Installation Guide CD Congratulations on y

An Ethernet based cable or DSL modem

Windows, Macintosh or Linux based operating system CD-ROM drive IE 6.0 or higher, Chrome 2.0, Firefox 3.0, Safari 3.0 System requirements The following system requirements are recommended:. Product View Below shown is the product view indicating the LED status. LED Description Status When the device is booted up and ready

Do not use the product in high humidity or high

temperatures. � Do not use the same power source for the Product as other equipment. Only use the power adapter that comes with the package. Using a different voltage rating power adaptor may damage the device. � Do

Mounting on the Ceiling/Wall

This device is designed for easily mounted on the ceiling or wall with a simple mount bracket. Before mounting it to the expected location, please make proper configuration for the device setting and run the PoE Ethernet cable to the location in advance. The following illustrations show you how to mount this device on the ceiling

Digisol Wireless Access Point Owners Instructions: