Directed 2102T Owner's Manual

Model 2102T Owner’s Guide © 2012 Directed, Vista, CA G2102T ...

Contents Government regulations .....................................................................................4 Warning! Safety first .........................................................................................6 Important information ................................................................. ...

Government regulations This device complies with Part 15 of FCC rules. Operation is subject to the fol- lowing two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has b ...

This device complies with the Industry Canada Radio Standards Specification RSS 210. Its use is authorized only on a no-interference, no-protection basis; in other words, this device must not be used if it is determined that it causes harmful interference to services authorized by IC. In addition, the user of this dev ...

Warning! Safety first The following safety warning must be observed at all times: Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. Important information Congratulations on the purchase of your state-of-the-art Passive Keyless Entry System (PKE) ...

Using the system Automatic unlocking and locking of the vehicle Passive door unlocking The key fob LED will start flashing green once you have entered the active zone. The doors will be automatically unlocked and the starter kill (optional) will be disarmed. Note: The unlock operation may be delayed when approaching t ...

Manual unlocking Press and hold the button until the LED on the remote flashes red. The park- ing lights will flash twice to confirm the doors have been unlocked. Manual locking Press and release the button for 1 second. The LED on the remote will flash red indicating that the command is being sent, and the parking ...

Sleep mode For security reasons, your PKE system is in sleep mode while the vehicle is in motion. Turning the sleep mode ON In order to prolong the key fob battery life, the PKE system will enter sleep mode once the user is in the vehicle, all the doors are closed and the brake pedal is depressed (a valid key fob must ...

SmartLock Feature The purpose of the SmartLock feature is to prevent the doors from unwanted unlocking/locking when entering/exiting the active zone multiple times for a pre-programmed delay (No delay*,1, 3 or 5 minutes). This is practical in situ- ations such as loading/unloading packages. *SmartLock feature is disa ...