Fortinet FortiSIEM 2000F Hardware Configuration Manual

FORTINET DOCUMENT LIBRARY http://docs.fortinet.com FORTINET VIDEO GUIDE http://video.fortinet.com FORTINET BLOG https://blog.fortinet.com CUSTOMER SERVICE & SUPPORT https://support.fortinet.com http://cookbook.fortinet.com/how-to-work-with-fortinet-support/ FORTIGATE COOKBOOK http://cookbook.fortinet.com FORTINET TRAINING SERVICES http://www.fortin ...

4 Step 2: Power On the FSM-2000F appliance 4 Step 3: Verify System Information 4 Step 4: Configure Network 5 Step 5: Generate FortiSIEM FSM-2000F License Key file from FortiCare 5 Step 6: Register FortiSIEM License 5 Step 7: Accessing FortiSIEM UI 6 Step 8: Using FortiSIEM 6 Fac ...

Step 1: Rack mount the FSM-2000F appliance 1. Follow FortiSIEM 2000F QuickStart Guide here to mount FSM-2000F into rack. 2. Insert Hard Disks positions as shown below: 3. Connect FSM-2000F to the network by connecting an Ethernet cable to Port1. Before proceeding to the next ...

Displays system name, version and serial number. diagnose hardware info Displays system hardware information like CPUs, Memory and RAID information. diagnose interface detail port1 Displays interface status. Step 4: Configure Network 1. On the hardware console, select Set Timezone and then press Ent ...

Step 7: Accessing FortiSIEM UI 1. Note the IP Address assigned to FortiSIEM VM in Step 5. 2. Access FortiSIEM VM from browser (https://). 3. Login to FortiSIEM using the default user name, password, and organization: l UserID: admin l Password: admin*1 l Cust/OrgID: super (if ...

Step 1: Uninstall FortiSIEM application 1. Connect FortiSIEM device using VGA or Console port. 2. Login as ‘admin’ user without password. 3. To check the available FortiSIEM commands, run sudo get. 4. To uninstall FortiSIEM, run sudo execute fsm-clean. Thi ...

After successful upgrade to FortiSIEM v4.10.0, register the new License from Fortinet support site. Follow the steps below to upgrade FortiSIEM from v4.9.2 to v5.0.0: 1. Register and download the new v4.10.0 license from FortiCare support si ...

Hardware Software Peripherals l USB Keyboard l USB Mouse l VGA Monitor USB Thumbdrive l 4 GB Thumbdrive (for Linux installation) l 8 GB Thumbdrive (for FortiSIEM appliance image) l Ubuntu Desktop Setup Files l Rufus (Bootable USB Utility) l Fort ...

1. Connect to the console/SSH of the FortiSIEM appliance. 2. Run the following command: execute fsm-clean 3. After fsm-clean is complete, format RAID by executing the command: execute format disk 4. Power-off the FortiSIEM appliance. Step 4: Configure 2000F BIOS to Boot into USB Drive 1. Connect the 4G ...