AOpen SV520 Operation & User’s Manual

All Rights Reserved. AOpen SV520 User’s Guide Changes may be made periodically to the information in this publication without obligation to notify any person of such revision or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. No part of this publication may be reproduced., store ...

1. Read these instructions carefully. Save these instructions for future reference. 2. Follow all warnings and instructions marked on the product. 3. Do not use this product near water. 4. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. 5. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. The openings should n ...

9. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed 15 amperes. 10. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 11. Do not attempt to service this product yourself, as opening ...

e. If the product has been dropped or the cabinet has been damaged f. If the product exhibits a distinct change in performance, indicating a need for service Use only the proper type of power supply cord set for this unit. It should be a detachable type: UL listed/CSA certified, type SVT/SJT, rated 6A 125V minimum, VDE approved or its equivalent. Maximum length is 15 feet (4.6 meters). ...

Waarrnniinngg DANGER INVISIBLE RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. CLASS 1 LASER PRODUCT APPAREIL A LASER DE CLASSE 1 LASER KLASSE 1 LOUKAN 1 LASERLAITE PRODUIT LASER CATEGORIE 1 ...

SSttaatteem meenntt Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not oc ...

could void the user's authority to operate the equipment. Notice 2: Shielded interface cables, if any, must be used in order to comply with the emission limits. AAbboouutt tthhiiss M Maannuuaall Purpose This user’s guide aims to give you the information you need to operate the system properly and tells you how to install internal components. ...

Text entered by user Represents text input by the user. , , , etc…. Represent the actual keys that you have to press on the keyboard. NOTE Gives bits and pieces of additional information related to the current topic. CAUTION Gives precautionary measures to avoid possible hardware or software problems. IMPORTANT Reminds you to take specific actions relevant to the accomplishment of procedures. Open A 9 ...

maannuuaall SV520 ...................................................................................................................................................................1 IMPORTANT SAFETY INSTRUCTIONS .................................................................................................................3 CD-ROM SAFETY WARNING............................................................................................................................6 FCC CLASS A RADIO FREQUENCY INTERFERENCE STATEMENT................................................ ...

1.3.3 Removing the side panels..................................................................................................................27 1.4 INSTALLING AND REMOVING DEVICE DRIVES .........................................................................................28 1.4.1 Removing drive bay covers ...............................................................................................................28 1.4.2 Installing and Removing a 3.5” D ...

basic system components such as disk drives, a motherboard, or expansion boards. ...

Additional duplicate keys can be found at the back of the system. ...

2 HDD access LED 3 Power/Suspend LED 4 Power button 5 3.5” FDD 6 3.5” FDD eject button 7 CD-ROM tray (Optional) 8 CD-ROM tray eject button 9 Tape drive (Optional) 10 Tape drive eject button 11 Hot-swap redundant HSC6 cage fan (Optional, three fans) 12 HSC6 HDD trays (Optional, six trays) ...

14 Drive bay cover 15 Housing wheels 16 SCSI drive error LED(Optional) 17 SCSI drive activity LED(Optional) 18 SCSI drive power LED(Optional) 19 Hot-swap redundant fan fail LED(Optional) 20 Drive LED (Amber) (Optional) 21 Media LED (Green) (Optional) 22 Clean LED (Green) (Optional) 23 CD-ROM drive activity LED(Optional) 24 Headphone/earphone port(Optional) 25 Volume control(Optional) ...

2 RJ45 LAN port 3 1 st USB port 4 VGA D-sub 15-pins connector 5 Parallel port 6 Serial port (COM1) 7 PS/2 keyboard connector 8 PS/2 mouse connector 9 System power socket 10 Hot-swap power supply activity LED (Orange when fail) 11 Hot-swap power supply (Redundant power supply is optional) 12 Fan ...

14 SCSI connector punch out hole 15 Serial port punch out hole 16 NMI switch punch out hole ...