broda V4 Operating Manual
Text of broda V4 Operating Manual
Synthesis Tilt Recliner
Model: V4
Distributor/Rep: This manual must
be given to the caregiver responsible
for this chair and its occupant.
Caregiver: Before using this chair,
read this manual thoroughly and save
for future reference.
Actual product may differ slightly from images in Operating Manual
FOREWORD ................................................................................................................................................................. 1
GENERAL INFORMATION ........................................................................................................................................ 2
1
DEFINITIONS ......................................................................................................
This document provides guidance on the safe and effective operation of the BRODA chair.
Information in this manual must be followed at all times.
Anyone involved with the operation or maintenance of the BRODA chair, including the
resident’s family members, must read this operating manual before using the chair.
The resident’s primary caregiver is responsible for ensuring that anyone who is unfamiliar with,
unwilling, or unable t
“BRODA” means BRODA Enterprises Inc. doing business as BRODA Seating.
“BRODA chair” refers to chair model Synthesis Model V4.
“Long-Term Care Institution” refers to a nursing home, hospital, or other healthcare facility that provides health and
personal care to its residents on a long-term basis.
“Resident” refers to an individual living in a long-term care institution under the care of professional caregivers.
“Professi
broda V4 Before the chair is put into service, this manual must be read thoroughly by the caregiver(s) directly
responsible for the resident’s care.
After the chair is put into service, this manual must be read thoroughly by any new caregivers prior to
operating or moving the chair.
For the purpose of this manual, a resident’s family member who shares responsibility for their care is considered a
caregiver and is subject
BRODA chairs should be kept in a clean, dry environment. Do not leave BRODA chairs outdoors as it may cause
the paint to peel.
Upon receipt, the shipping carton must be immediately examined for damage. Any damage should be noted on the
delivery receipt and a request for inspection by the transportation company should be made. Next, the shipping
carton should be opened and the chair must be examined for concealed shipping damage. If the chair appears to b
Note that removing and attaching the footrest may be easier for the caregiver with the brakes applied
Failure to follow these instructions will unnecessarily increase the risk of serious falls by residents, caregivers, or
third parties caused by the chair unintentionally moving.
2.5.5
39BRe-Positioning of Resident - “Danger of Clamping”
BRODA chairs offer the benefits of seat tilt, back recline, leg rest/footrest elevation, and moveable arms. During
As outlined, the improper use of the chair is dangerous to the resident, caregivers, or third parties, and can consist of,
but is not limited to the following:
1)
Unauthorized operation of the chair’s functions.
2)
Unauthorized movement of the chair.
3)
Inappropriate use of the chair for a resident who has not been assessed by a qualified caregiver
responsible for their seating.
4)
Failure to frequently reposition the resident in th
For best cleaning results, certain parts and padding on the chair should be removed: Instructions for removal of the
following parts are located in this manual: Ensure that the entire chair including removable and non-removable parts
is thoroughly cleaned.
Pay close attention to the frame, sockets, fasteners, parts and casters, as well as the padding for an even, thorough
clean.
Remove parts for cleaning if desired:
1) Wings
2) Swing Away/Removable Arms
Residents who have involuntary movements.
3)
Residents weighing over 220 lbs.
4)
A facility with irregular or sloped surfaces.
5)
Any unauthorized person.
Do not use lubricants that contain solvents. Solvents may compromise any rubber components on the chair. If
necessary, white food grade grease or lubricant can be used on any sliding components.
16BResident Specific Instructions
The primary caregiver responsible for the specific resident’s seating shall add additional instructions necessary for
the safe and effective use of the chair based on their professional experience and knowledge of the resident’s
specific conditions and requirements.
BRODA representatives are not professional caregivers and will not know the specific requirements of the
individual using the chair. BRODA relies on
broda V4 4BOPERATION AND MOVEMENT
Safety measures as described in Section 1 must be observed when operating the chair’s functions or moving the
chair. Only authorized caregivers should attempt to operate or move a chair. The caregiver must use proper body
mechanics when operating the chair, and be prepared to support the weight of the resident while operating the chair.
3.1
17BSeat Tilt
Gas cylinders allow the seat to be tilted to any position
from most upri
broda V4 20BElevating Leg Rest
Gas cylinders allow the leg rest to be positioned
infinitely from horizontal to vertical. The leg rest
elevates and extends with recline on the V4. It is also
independently adjustable.
To Adjust the Leg Rest:
-Hold leg rest to assist movement and squeeze the leg
rest handle.
-Raise or lower the leg rest to the desired angle.
The leg rest articulates with changes to the back recline
but not with changes to the seat tilt. If the
Wings support the Shoulder Bolsters which provide
upper body lateral support. The wings are width and
height adjustable to accommodate various residents.
To Remove the Wing:
-Loosen the knob (1) and pull the wing from the
receptacle.
To Insert the Wing:
- Insert the wing back into the receptacle. Tighten the
knob and ensure the wing is secured in place.
To Adjust the Wing Height:
-Loosen the knob and raise or lower the wing to the
24BSwing Away/Removable Arms
The swing away removable arms allow for side access to
facilitate safe and easy transfers.
To Remove the Arms:
- Push the button on the front of the seat, while pulling
out the arm.
- Swing the side panel away or remove completely.
Note: Chairs with mag wheels of 20” or larger will not
allow for the side panels to swing away, however they
are removable.
3.9
25BHeight Adjustable Armrests
The armrest height can easily be
The V4 features 5” front total lock casters and 6” rear
directional locking casters.
To Operate the Front Casters:
Step on/off caster pedal to lock/unlock caster.
To Operate the Rear Casters:
The rear caster function is controlled by one step on the
rear pedal.
The tracking position (green dot down) eliminates any
swivel function, which is ideal for pushing the chair
down hallways.
The swivel position (neutral, horizontal pedal) is
inspected on a bimonthly basis. The visual inspection procedure should include at least the observation of all the
fittings (fasteners):
The visual inspection procedure should include at least the observation of the following parts:
1)
The cylinders that position the seat tilt, back recline, and independent leg rest elevation.
2)
The vinyl straps used in the seat, back, leg rest, footrest and wings
3)
The cushions
4)
The 3 black handles and cables.
5)
T
Specifications Based on 20” Wide Synthesis V4 chair
1. Back Recline:
Up to 90º (infinitely adjustable)
Trendelenburg position capable
2. Seat Tilt:
Up to 40º of seat tilt (infinitely adjustable)
3. Frame:
Powder coated steel
4. Seat/Back Surface:
BRODA Comfort Tension Seating® Strapping is 1-1/2” wide, by 1/8” thick; contains
fungicide, has shape memory retention, is fire retardant
5. Arms:
Seat m