Conel UR5i v2 Configuration Manual

of the device. Attention – notice on possible problems, which can arise in specific cases. Information, notice – information, which contains useful advice or special interest. Firmware version Actual version of firmware is 3.0.8 (August 30, 2013). GPL licence Source codes under GPL licence are available free of charge by sending ...

1 1.1 Secured access to web configuration . . . . . . . . . . . . . . . . . . . . . . . . 2 1.2 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.2.1 Mobile Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.2.2 Primary LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2.3 Peripheral Ports . . . . . . . . . . . . . ...

70 1.28 Startup script . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 1.29 Up/Down script . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 1.30 Automatic update configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 1.31 User modules . . . . . . . . . . . . . . . . . . . . . . . . . . ...

List of Figures 1 Web configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 Mobile WAN status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 Network status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4 DHCP status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 IPsec status . . . . . . . . . . . . . . . . . . . . . . . . . . ...

41 PPTP tunnel configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 42 Topology of example PPTP tunnel configuration . . . . . . . . . . . . . . . . . . 50 43 Example of DynDNS configuration . . . . . . . . . . . . . . . . . . . . . . . . . 51 44 Example of NTP configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 45 Example of SNMP configuration . . . . . . . . . . . . . . . . . . . . . . . . ...

List of Tables 1 Mobile connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Peripheral Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4 Mobile Network Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 5 Description of period . . . . . . . . . . . . . . . . . . . . . . . ...

41 Example PPTP tunel configuration . . . . . . . . . . . . . . . . . . . . . . . . . 50 42 DynDNS configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 43 NTP configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 44 SNMP agent configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 45 SNMPv3 configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

1. Configuration over web browser Attention! If the SIM card is not inserted in the router, then wireless transmissions will not work. The inserted SIM card must have activated GPRS. Insert the SIM card when the router is switched-off. For monitoring, configuring and managing the router use web interface, which can be invoked by entering the IP address of the router into your browser. The default IP address of the router ...

After green LED starts to blink it is possible to restore initial settings of the router by press- ing button RST on front panel. If press button RST, configuration is restored to default and it is reboot (green LED will be on). 1.1 Secured access to web configuration To the web configuration can be accessed via a secure HTTPS protocol. In the event of a default router IP address is a secure router configuration access ...

Continued from previous page Item Description Rx Data Total number of received bytes Rx Packets Received packets Rx Errors Erroneous received packets Rx Dropped Dropped received packets Rx Overruns Lost received packets because of overload Tx Data Total number of sent bytes Tx Packets Sent packets Tx Errors Erroneous sent packets Tx Dropped Dropped sent packets Tx Overruns Lost sent packets because of overload Uptime Time ...

Continued from previous page Item Description Profile Current profile – standard or alternative profiles (profiles are used for example to switch between different modes of operation) Supply Voltage Supply voltage of the router Temperature Temperature in the router Time Current date and time Uptime Time indicating how long the router is used Table 3: System Information 1.3 Mobile WAN status This item is not available ...

Continued from previous page Item Description Revision Revision of module IMEI IMEI (International Mobile Equipment Identity) number of module ESN ESN (Electronic Serial Number) number of module (for CDMA routers) Table 4: Mobile Network Information Highlighted in red adjacent cells have a close signal quality, which means that there is imminence of frequent switching between the current and the highlighted cell. The next ...

In the middle part of this page is displayed information about transferred data and number of connections for both SIM card (for each period). Item Description RX data Total volume of received data TX data Total volume of sent data Connections Number of connection to mobile network establishment Table 7: Traffic statistics The last part (Mobile Network Connection Log) informs about the mobile network connec- tion and prob ...

Interface Description eth0, eth1 Network interfaces ppp0 Interface (active connection to GPRS/EDGE) tun0 OpenVPN tunnel interface ipsec0 IPSec tunnel interface gre1 GRE tunnel interface usb0 USB connector interface Table 8: Description of interface in network status By each of the interfaces is then shown the following information: Item Description HWaddr Hardware (unique) address of networks interface inet IP address of i ...

It is possible to read status of connection to mobile network from the network information. If the connection to mobile network is active, then it is in the system information shown as a ppp0 interface. For industrial router XR5i v2, interface ppp0 indicates PPPoE connection. Figure 3: Network status 1.5 DHCP status Information on the activities of the DHCP server can be accessed by selecting the DHCP status item. DHCP sta ...

Figure 4: DHCP status In the extreme, the DHCP status can display two records for one IP address. That could have been caused by resetting of network cards. 1.6 IPsec status Information on actual IPsec tunnel state can be called up in option IPsec in the menu. After correct build the IPsec tunnel, status display IPsec SA established (highlighted in red) in IPsec status information. Other information is only internal charac ...

In detecting the status of updates DynDNS record are possible following message: • DynDNS client is disabled. • Invalid username or password. • Specified hostname doesn’t exist. • Invalid hostname format. • Hostname exists, but not under specified username. • No update performed yet. • DynDNS record is already up to date. • DynDNS record successfully update. • DNS error encountered. • DynDNS server ...

Figure 7: System Log Example of logging into the remote daemon at 192.168.2.115: Figure 8: Example program syslogd start with the parameter -r 11 ...

1.9 LAN configuration To enter the network configuration, select the LAN menu item. ETH network set in Primary LAN configuration, expansion PORT ETH set in Secondary LAN configuration. Item Description DHCP Client • disabled – The router does not allow automatic allocation IP address from a DHCP server in LAN network. • enabled – The router allows automatic allocation IP address from a DHCP server in LAN networ ...