Hdav HD-C5S4P Operation & User’s Manual

with Bi-directional IR, RS Auto EDID Learning HDMI Extender over Single CAT.X directional IR, RS-232 Serial Auto EDID Learning User Manual (HD-C5S4P) HDMI Extender over Single CAT.X Serial, and rev: 120403 ...

learning has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all e Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. ● Follow all instructions and warnings marked on this unit. ● Do not attempt to service this unit yourself, except ...

Learning boosts up your video/audio transmission distance up to 60m (200ft) in HDTV 1080i format, 40m (130ft) in HDTV 1080p format, and 20m (65ft) in HDTV 1080p with 36 supports the most advanced 3D video format and therefore guarant the market. With only one cost effective Cat.5/5e/6 cable, users can readily extend HDTV sources from DVD players, Blu-ray Disc player, PS3, PC, and any other kinds of ...

Transmitter [TX] Receiver [RX] HDMI compliance HDMI Deep Color & full 3D HDCP compliance Yes Video bandwidth Single-link 225MHz [6.75Gbps] Video support 480i / 480p / 720p / 1080i / 1080p60 HDMI over UTP transmission [24-bit] Full HD (1080p)-40m (130ft) [CAT5e] / 50m (165ft) [CAT6] HD (720p/1080i)-50m (165ft) [CAT5e] / 60m (200ft) [CAT6] Audio support Surround sound (up to 7.1ch) or stereo digita ...

2. MODE: A - EDID Full-HD(1080p@60) B - EDID Full-HD(1080p@60) C - EDID Full-HD(1080p@60) D - EDID Full-HD(1080p@60) E - EDID HD(1080p@30)(1080i@60)(720p@60) F - EDID HD(1080p@30)(1080i@60)(720p@60) G - EDID Full-HD(1080p@60) H – Auto EDID learning 3. Dip Switch: Setup the RS-232 mode for serial communication channel 4. HDMI IN: Connects to a HDMI source with a HDMI mal ...

10. Signal Level: Adjust the 8-level equalization control to the received HDMI signals. The HDMI signal level varies from MAX (strongest) to MIN (weakest) for respective transmission length from longest possible range to short distance. Please adjust the signal level from rotary switch whenever the audio/video is playing normally. Inappropriate signal level setting may cause overp ...

DIP Switch Position Description TX & RX ON [� � � �] TxD: The 2nd pin of RS-232, which is in charge of receiving data RxD: The 3rd pin of RS-232, which is in charge of sending data OFF [� � � �] TxD: The 3rd pin of RS-232, which is in charge of receiving data RxD: The 2nd pin of RS-232, which is in charge of sending data (TX MODULE) Default RS232 Port Module Settings and Required DB9 Cables: Both ...

● 1x IR blaster ● 1x IR receiver ● 2x DC 5V 2A wall wart ● 1x User Manual CONNECTION DIAGRAM ...

other enf to control the devices corresponding to the IR signals. IR RECEIVER: plug in the IR receiver to receive all IR command signals from the IR remote controls of the corresponding devices. Definition of IR Earphone Jack IR Blaster You can buy any IR extension the IR sockets for the matrix than 2m (6-ft) m ...

2. Connect a HDMI or DVI display (such as a LCD TV) to the receiving unit HD-C5S4P-RX. 3. Connect IR Blaster/Receiver to both TX and RX units. 4. Connect a Cat-5/5e/6 cable between the transmitting and receiving units. 5. Make sure this Cat-5/5e/6 cable is tightly connected and not loose. 6. Plug in 5V DC power supply unit to the po ...

Pin 1 TMDS Data2+ Pin 11 TMDS Clock Shield Pin 2 TMDS Data2 Shield Pin 12 TMDS Clock– Pin 3 TMDS Data2– Pin 13 CEC Pin 4 TMDS Data1+ Pin 14 Reserved (N.C. on device) Pin 5 TMDS Data1 Shield Pin 15 SCL Pin 6 TMDS Data1– Pin 16 SDA Pin 7 TMDS Data0+ Pin 17 DDC/CEC Ground Pin 8 TMDS Data0 Shield Pin 18 +5V Power Pin 9 TMDS Data0– Pin 19 Hot Plug Detect Pin 10 TMDS Clock+ CAT5 [RJ45] ...

MAX and stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate signal level setting may cause overpowering issue that would shorten the product life significantly! 2. Wrongly insert IR blaster and IR receiver to wrong 3.5mm infrared sockets may result in the failure of the IR extenders. Please check carefully before plugging in the IR extender to the respective IR ...

RS-232, and Auto EDID Learning free from defects in the material and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer. Should this product fail to be in good working order within 1 year warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit has not been subjected to accident, di ...