Hendi 210215 Operation & User’s Manual

Text of the manual

You should read this user manual carefully before

using the appliance Bevor Sie das Gerät in Betrieb nehmen, sollten Sie diese Gebrauchsanweisung aufmerksam lesen Alvorens de apparatuur in gebruik te nemen dient u deze gebruiksaanwijzing aandachtig te lezen Przed uruchomieniem urządzenia należy koniecznie dokładnie przeczytać niniejszą instrukcję obs�

Keep this manual with the appliance.

Diese Gebrauchsanweisung bitte beim Gerät aufbewahren. Bewaar deze handleiding bij het apparaat. Zachowaj instrukcję urządzenia. Gardez ces instructions avec cet appareil. Conservate le istruzioni insieme all’apparecchio. Păstraţi manualul de utilizare alături de aparat. Хранить руководство в�

Thank you for purchasing this Hendi appliance. Please read this manual carefully before connecting the

appliance in order to prevent damage due to incorrect use. Read the safety regulations in particular very carefully. SAFETY REGULATIONS • Incorrect operation and improper use of the appliance can seriously damage the appliance and injure u

• Turn off the appliance before pulling the plug out of the socket.

• Never carry the appliance by the cord. • Do not use any extra devices that are not supplied along with the appliance. • Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appliance label. • Avoid overloading. • Turn off

1. INFORMATION ON THE SLICER

1.1 GENERAL PRECAUTIONS • The slicer must be operated only by highly qual- ifi ed people who are fully aware of the safety measures described in this manual. • In case of personnel rotation, training is to be pro- vided in advance. • Although the slicer is equipped with safety devices in the dangerous points, it is

1.3 SLICER COMPONENTS

Fig. 1 1. Blade guard 12. Sharpener locking knob 2. Hand cover 13. Tie rod for blade guard 3. Thickness gauge (plate) 14. Power supply cord 4. Push-button panel 15. Base 5. Dial knob 16. Rating plate - serial number 6. Feet 17. Thickness gauge support 7. Carriage lock screw 18. Blade 8. Stem 19. Defl ector 9. Meat pusher 20. Meat

2. TECHNICAL DATA

OVERALL DIMENSIONS, WEIGHT, CHARACTERISTICS Rys. 2 TABLE 1 Parameter Unit of measure 210215 210222 210246 ø Blade mm 250 250 300 Motor Watt 150 150 250 Hp 0.2 0.2 1/3 Power Supply 230V ~50Hz Cut thickness mm 11 11 14 Run of carriage mm 245 245 245 Tray size mm 230x230 230x230 250x275 A x B x C mm 494x402x398 494x402x398 615x494x477 Ne

3. SUPPLY OF THE SLICER

3.1 DISPATCH OF THE SLICER Slicers are accurately packed and then dispatched from our warehouses; the package includes: a) a carton box b) the slicer c) two polythene polyfoam packages d) a wheel & a V-Belt e) manual 3.2 PACKAGE CHECK UPON ARRIVAL If no external damage is evident on the package upon its arrival, open it and check

4.2 ELECTRIC CONNECTION

The slicer is equipped with a power supply cord and a VDE PLUG. Connect the slicer with 230V ~50Hz power source. Check that the earthing is fully operational. Moreover, check the features on the rating plate whether the serial number corresponds to the fea- tures shown in the delivery note. If the direction of rotation is wrong,

5. OPERATING OF THE SLICER

5.1 CONTROLS Controls are placed on left hand side of the base as shown in the fi gure. Position of controls (see Fig.2). 1. Dial knob to adjust the cutting thickness. 2. Switch-on button “I” 3. Switch-off button “0” Fig. 2 5.2 LOADING AND SLICING OF FOODSTUFFS WARNING: Products to be cut must be loaded on the food t

Other Kitchen Appliances Manuals