Intel NUC7i3BNK Operation & User’s Manual

1 Intel® NUC Kit NUC7i5BNK Intel® NUC Kit NUC7i3BNK User Guide ...

2 Before You Begin CAUTIONS The procedures in this user guide assume familiarity with the general terminology associated with personal computers and with the safety practices and regulatory compliance required for using and modifying electronic equipment. Disconnect the computer from its power source and from any telecommunications link or network before performing any of the procedures described in this guide. Failure to disconnect power, telecommunications links, or networks before you open the computer or perform any procedures can result in personal injury or equipment damage. Some circuitry on the b ...

3 This guide tells you how to: • Install an M.2 SSD • Install and remove memory • Install a VESA mount bracket • Connect power • Install an operating system • Install the latest drivers Open the Intel NUC Chassis To open the Intel NUC chassis, follow these steps: 1. Unscrew the four corner screws on the bottom cover of the chassis and lift the cover. Install an M.2 SSD Intel NUC Kits NUC7i3BNK and NUC7i5BNK support 80mm, 60mm, and 42mm M.2 SSDs. For a list of tested M.2 SSDs, go to the Tested Peripherals page on the Support site. Observe the precautions in "Before You Begin" on page 2. If you ...

4 4. Insert the bottom edge of the M.2 card into the connector (C). 5. Secure the card to the standoff with the small silver screw (D). If you are installing a 42mm M.2 SSD: 1. Remove the small silver screw from the metal standoff on the motherboard (A). 2. Align the small notch at the bottom edge of the M.2 card with the key in the connector. 3. Insert the bottom edge of the M.2 card into the connector (B). 4. Secure the card to the standoff with the small silver screw (C). Installing and Removing Memory Intel NUC Kits NUC7i3BNK and NUC7i5BNK have two DDR4 SO-DIMM sockets. Memory requirements:  1.2V me ...

5 Install SO-DIMMs If you plan to install just one SO-DIMM, install it in the lower memory socket. To install the SO-DIMMs, follow these steps: 1. Observe the precautions in "Before You Begin" on page 2. 2. Turn off all peripheral devices connected to the computer. Turn off the computer and disconnect the AC power cord. 3. Align the small notch at the bottom edge of the SO-DIMM with the key in the socket. 4. Insert the bottom edge of the SO-DIMM into the socket. 5. When the SO-DIMM is inserted, push down on the outer edge of the SO-DIMM until the retaining clips snap into place. Make sure the clips are fi ...

6 Close the Chassis After all components have been installed, close the Intel NUC chassis. Attach and Use the VESA Bracket (Optional) Follow these instructions to attach and use the VESA mount bracket: 1. Attach the VESA bracket to the back of the monitor or TV, using the four small black screws that were included in the box. ...

7 2. Attach the two slightly larger black screws to the bottom chassis cover of the Intel NUC. 3. Slide the Intel NUC onto the VESA mount bracket. Connect Power Country-specific power plug attachments are included in the Intel NUC Kit box. 1. Choose the attachment for your region. SKU (Product codes) Attachments in the box NUC6CAYHR US – United UK – United EU – European AUS - Australia ...

8 States Kingdom Union NUC6CAYHL ARG - Argentina CHN - China BRA - Brazil IND - India KOR – South Korea 2. Slide the attachment (B) onto the power plug, locking it into place (A). 3. Connect AC power. ...

9 Install an Operating System Refer to Supported Operating Systems for a list of Intel-validated Windows* operating systems, as well as versions of Linux that have been reported as compatible by Intel NUC owners. Refer to Operating System Installation for system requirements and installation steps. Install Intel NUC Drivers To download the latest Microsoft* Windows* drivers and BIOS updates, go to Download Center: Links:  Intel® NUC Kit NUC7i3BNK  Intel® NUC Kit NUC7i5BNK Drivers are available for the following features:  Audio  Bluetooth  Card Reader  Chipset  Consumer Infrared  ...