Burkert 6407 Operating Instructions Manual

2/2-Wege-Magnetventil Électrovanne 2/2 voies ...

▶ Read the operating instructions carefully and follow the safety instructions in particular, and also observe the operating conditions. ▶ Operating instructions must be available to each user. ▶ The liability and warranty for the device are void if the operating instr ...

In these operating instructions, the term “device” always refers to the solenoid valve Type 6407. 2 INTENDED USE Incorrect use of the solenoid valve Type 6407 can be dangerous to people, nearby equipment and the environment. ▶ The device is designed to control, shut off and meter neutral media up to a viscosity of ...

These safety instructions do not consider any contingencies or inci- dents which occur during installation, operation and maintenance. The operator is responsible for observing the location-specific safety regulations, also with reference to the personnel. Danger of high pressure. ▶ Before loosening the lines and valves, turn ...

dance with the specified application conditions. 3.2 Information on the Internet The operating instructions for Type 6407 can be found on the internet at: www.burkert.com 4 TECHNICAL DATA 4.1 Operating conditions The following values are indicated on the type label: • Vo ...

Declaration of Conformity (if applicable). 4.3 Standards The applied standards, which verify conformity with the EU Directives, can be found on the EU-Type Examination Certificate and / or the EU Declaration of Conformity (if applicable). 4.4 Application conditions Ambient temper ...

operation: If standstill for a long period at least 1-2 activations per day are recommended. Service life: High switching frequency and high pressures reduce the service life Permitted media depending on seal material: Seal material Permitted media PTFE/Graphit Vacuum, neutral gases an ...

▶ Before loosening the lines and valves, turn off the pressure and vent the lines. Risk of electric shock. ▶ Before reaching into the device, switch off the power supply and secure to prevent reactivation. ▶ Observe applicable accident prevention and safety regulations ...

WARNING! Risk of injury due to electrical shock. ▶ Before reaching into the system, switch off the power supply and secure to prevent reactivation. ▶ Observe applicable accident prevention and safety regulations for electrical equipment. If the protective conductor is not connected, there is a risk of electri ...

▶ Before loosening the lines and valves, turn off the pressure and vent the lines. WARNING! Risk of injury from improper maintenance. ▶ Maintenance may be carried out by authorized technicians only and with the appropriate tools. ▶ Secure system from un ...