Graco 96G017 Instruction Manual

Lubrication Pump For dispensing of NLGI Grades #000 to #2 greases and oil with at least 40cSt. For Professional Use Only. Not approved for use in explosive atmospheres or hazardous locations. Part Nos., page 3 5100 psi (35.1 MPa, 351.6 bar) Maximum Working Pressure Important Safety Instructions Read all warnings and i ...

2 Liter Models . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4 Liter Models . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 8 Liter Models . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 12 Liter Models . . . . . . . . . . . . . . . . . . . . . ...

332305B 3 Part / Model Numbers The Part Number is a six-digit unique number that is only used to order the G3 Pump. Directly related to this six digit Part Number is the configured Graco Model Number. This configured number identifies the distinct features of a spe- cific G3 Pump. To help you understand each component that makes up the M ...

4 332305B 8 Liter Models 12 Liter Models 16 Liter Models Part Numbers Model Numbers 96G089 G3-G-24MX-8L0L00-10CV00R0 96G093 G3-G-ACMX-8L0L00-1D0V0000 96G097 G3-G-12MX-8L0L00-1DMVA2R3 96G100 G3-G-12MX-8L0L00-UDMVA1R2 96G104 G3-G-24MX-8L0L00-1DMVA2R3 96G109 G3-A-24MX-8L0L00-1DMVA2R3 96G112 G3-G-24MX-8L0L00-UDMVA1R2 96G119 G3-G-ACMX-8L0L00- ...

332305B 5 Understanding the Model Number Use the Code Sample provided below to identify each component’s location in the Model Number. The options for each component that make up the code are provided on the lists below. NOTE: Some pump configurations are not available. Contact Graco Customer Service or your local Graco distributor for ...

tion point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. When these symbols appear in the body of this manual, refer back to these warnings. Additional, product-specifi ...

High-pressure fluid from dispensing device, hose leaks, or ruptured components will pierce skin. This may look like just a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment. • Do not point dispensing device at anyone or at any part of the body. • Do not put your hand o ...

total) C Pressure Relief Valve (Not included / required for each outlet - Available from Graco. See Parts, page 71.) D Zerk Inlet Fill Fitting (1 included / grease models only) E Pump Outlet Plug (2 included) F Volu ...

B Pressure relief valve (Not included/required for each outlet - user supplied. See Parts, page 71) C - Cycle indicator sensor cable (Divider Installations) - Pressure switch cable (Injector Installations) D - Series progressive divider valves ...

• Select a location that will adequately support the weight of the G3 Pump and lubricant, as well as all plumbing and electrical connections. • Refer to the two mounting hole layouts provided in the Mounting Pattern section of this manual, page 74. NOTE: The two mounting hole layouts provided in t ...