Intermec MaxiScan 3010 Installation Manual

Regulatory statements Intermec hereby declares that the MaxiScan 3010 Network System has been tested and found compliant with the below listed standards as required by the EMC Directive 89/336/EEC as amended by 92/31/EEC and by the Low Voltage Directive 73/23/EEC as amended by 93/68/EEC: EN55022 (199 ...

3 Contents 1 Introduction...........................................................................5 Warnings 2 Installation.............................................................................7 Checklist of items for your installation Installation considerations 3 Connections .................................... ...

5 1 Introduction The MaxiScan 3010 Network System (MNS 3010) is a network connection module designed to connect up a network of up to 20 MaxiScan scanners (MaxiScan 3100, MaxiScan 3300). This Installation Guide explains how to install your MNS 3010 and how to set up a network configuration. Use the EasySet System setup so ...

7 2 Installation Checklist of items for your installation � MaxiScan 3010 Network System connection box � this MaxiScan 3010 Network System Installation Guide � terminator connector - P/N 3-500029-01 Options: � Intermec Product Information cd-rom with EasySet System Setup software supporting MaxiScan 3010 Network ...

9 3 Connections Connections POWER SUPPLY SCANNER BUS SYNCHROS HOST input / output synchronization power supply RS-232 C host network cable See the Pinouts and Intermec scanner bus cables sections to make your physical connections. How you connect up your MaxiScan 3010 Network System depends on the number of MaxiScan unit ...

Network of more than 2 MaxiScan units (with MCS boxes) The MaxiScan units are connected to their respective standard MaxiScan Connexion System (MCS) boxes. All standard MCS boxes are then interconnected to the MaxiScan 3010 Network System through an RS-485 network bus. Each MaxiScan has its own power supply ...