Graef MASTER M 80 Operating Instructions Manual

Safety instructions� 3 Unpacking� 5 Requirements on the installation location� 5 Safety hazards� 5 Cutting material� 5 Cutting operation� 5 Holder for remainders� 6 Tilting by 30 deg.� 6 Cleaning� 6 Preservation of value - blade� 7 Removing the blade� 7 Slide � 7 After-sales service� 8 Disposal� 8 Motor guarante ...

instructions mentioned hereinbefore. However, incorrect handling may lead to injury and damage. For safe handling of this unit, please observe the following safety instructions: � ● Before using the unit check for any external visible damage of the housing, the connection cable and plug. Do ...

and office; in agricultural estates; by guests in hotels, motels and other living quarters; in bed and breadfast boarding houses. � ● Always disconnect the connection cable by using plug; do not pull the connecting cable. � ● Before connecting the unit compare the connection data (voltage and frequency) ...

holder for remainders unless the size and shape of the food permits use without. Unpacking Proceed as follows to unpack the unit: � ● Remove the unit from the box. � ● Remove the packaging parts. � ● Remove any stickers on the unit (do not remove the typeplate). Requirements on the insta ...

cut better when pushed slowly. When slicing cucumbers or carrots, it is advantagous if they are cut to equal lengths first which are then fed using the holder for remainders. Holder for remainders The unit must not be used without the food holder for remainders unless the size and shape of the food permits use w ...

case of heavy soiling. Preservation of value - blade For a long-lasting sharpness and for a preservation of the value of your Graef blade we recommend that the blade be cleaned in regular intervals, especially after cutting cured meat or ham. They contain salts which when on the blade surface for a longer perio ...

� ● To remove the carriage, simply fold it to the side. � ● Use a moist cloth or running water to clean all parts. Important: Do not clean the slide in a dishwasher! � ● Once a month, add some drops of resin-free oil or petroleum jelly to the slideway. Use a soft cottonwool cloth to remove excessive oil / petroleum jelly. ...

Slide slide is dirty. Clean and grease the slide slide. Blade moves slugglishly. Cogwheels of the blade are not greased or are dirty. Undo and clean the blade; use petroleum jelly to grease the inside of the blade (cogwheel of blade) and the black ring. Grinding noise caused by blade. Food resi ...