Hirschmann MSM20 Operation & User’s Manual

Technical Support https://hirschmann-support.belden.eu.com User Manual Installation MICE Switch Media Modules MSM20/22/24/40/42 ...

not be taken to mean that these names may be considered as free in the sense of the trademark and tradename protection law and hence that they may be freely used by anyone. © 2014 Hirschmann Automation and Control GmbH Manuals and software are protected by copyrig ...

3 Contents Safety instructions 5 About this manual 13 Key 13 1 Description 14 1.1 General description 14 1.2 Device name and product code 15 1.3 Combination options 19 1.4 Slots in the basic module 21 1.5 Media modules 23 1.5.1 Media modules MSM20 23 1.5.2 Media modules MSM40 25 1.5.3 PoE-capable media module ...

2.5.3 100/1000 Mbit/s F/O port 41 2.5.4 100 Mbit/s F/O port 41 3 Maintenance and service 42 4 Disassembly 43 4.1 Removing an SFP transceiver (optional) 43 4.2 Removing a media module 43 4.2.1 Device variants featuring customer-specific version with the characteristic value HH 43 4.2.2 Device variants featur ...

5 Safety instructions  General safety instructions You operate this device with electricity. The proper and safe operation of this device depends on proper handling during transportation, proper storage and assembly, and conscientious operation and maintenance procedures. Improper use of this device is ass ...

 Intended usage  Use the product only for the application cases described in the Hirschmann product information, including this manual.  Operate the product only according to the technical specifications. See “Technical data” on page 45.  Connect to the product only components suitable for t ...

7  CE marking The labeled devices comply with the regulations contained in the following European directive(s): 2011/65/EU (RoHS) Directive of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2004/108/EC (EMC) D ...

 Relevant for Use as Industrial Control Equipment (according to the Standards UL508 / CSA C22.2 No. 142- 1987) When using the MSM20/22/24/40/42 devices as industrial control equip- ment the following restrictions apply: Max. surrounding air temperature: +60 °C (... to apply for operating temperature cha ...

9 CONTROL DRAWING for MSM24-IOIOIOIO devices for Use in Hazardous Locations Class I Division 2 , Groups A, B, C, D Rev. 0 Document No.:000172850DNR Page 1/2 Nonincendive field wiring parameters: THE RELAY TERMINALS ARE DEPENDENT UPON THE FOLLOWING ENTY PARAMETERS: *) Ui Ii Ci Li 30 V 90 mA 5 nF 1 µH The Ent ...

For Use in Hazardous Locations Class I Division 2 Groups A, B ,C ,D: Only allowed for MSP30 or MS32 model No´s. which are individually labelled ��������������������������������� Nonincendive field wiring circuits must be wired in accordanc ...