GRAUPNER mz-32 HoTT Reference Manual

Page 2 of 42 Help-Ref-EN-V1.0 TABLE OF CONTENTS MAIN SCREEN WIDGETS ......................................................................................................................... 4 BASE Menu ......................................................................................................................... ...

Page 3 of 42 Help-Ref-EN-V1.0 FREE MIXERS DETAIL ........................................................................................................................25 DUAL MIXERS ...................................................................................................................................25 RING ...

Page 4 of 42 Help-Ref-EN-V1.0 MAIN SCREEN WIDGETS The mz-32 home screen is designed around Widgets. There are a total of 6 decks that can be designed with widgets. Each widget fits inside a 1, 2, or 4 presentation block. Navigation between the decks is done by using the arrow keys (2 upper keys left of screen) or you can ...

Page 5 of 42 Help-Ref-EN-V1.0 BASE Menu MODEL LIST In the Model List menu, you can create a new model or select and load an existing one. To create a new model, tap on the number next to the model name. A selection toolbar will show with the available options. Tap the + icon to create a new model. Tap on the copy icon to ...

Page 6 of 42 Help-Ref-EN-V1.0 is increased. A selection of Front causes the throttle channel to decrease as the throttle control is increased. Tap on the stick mode to change your stick mode configuration. When done tap on the Create & Apply button, which will create the model and reinitialize the radio to load the new mo ...

Page 7 of 42 Help-Ref-EN-V1.0 RF SET In the RF Set menu you will manage all RF and Telemetry communications between the radio and receiver as well as binding your model to the radio. BINDING You can bind in total 4 receivers to the mz-32. The binding process requires you to place the receiver in bind mode, which can be do ...

Page 8 of 42 Help-Ref-EN-V1.0 RF Transmit Default is set to off. Tapping the off field will turn the RF to on. If no receiver is found the radio will sound an error and the Graupner front logo will blink in blue. Auto RF On Setting this field to on will activate the RF immediately after the model is loaded bypassing the R ...

Page 9 of 42 Help-Ref-EN-V1.0 Telemetry Speed In those situations where, for example, two airplane models are about to be operated at close proximity to another controlled by two separate transmitters, you may choose to reduce or eliminate the telemetry back channel of one of the models to avoid potential interference. S ...

Page 10 of 42 Help-Ref-EN-V1.0 Limit: sets the maximal servo deflection to a value where the servo does not mechanically bind. B04S2 CONTROL SET In the Control Set menu, you can set the controls such as switches, sliders and buttons that will activate and operate each channel. When setting up your model, the system automa ...