Gro Brooklyn Operation & User’s Manual

U S E R M A N U A L GPO_Brooklyn_Manual EU - Dec 2017_v2.indd 1 30/11/2017 14:50 ...

30/11/2017 14:50 ...

1980s design combines classic styling with a range of modern functionality. Featuring built-in speakers and a range of playback modes, the Boombox will allow you to enjoy Radio, CD, USB and Bluetooth sound anywhere inside or outside your home! For that real authentic 80s feel, the Brooklyn Boombox also features cassette tape playback. When using the DAB or FM Radio please fully extend the Antenna to improve the signal. GPO_Brooklyn_Manual EU - Dec 2017_v2.indd 3 30/11/2017 14:50 ...

30/11/2017 14:50 ...

Info Button Mode Select Knob Output Level Switch Playback Controls Play/Pause Previous Rewind Stop Fast Forward Next Record Search Knob (External Ring) Search Knob (Central Control) Menu Button Mode Switch Tape Counter Balance Knob Treble Knob Cassette Slot Volume Knob Bass Knob Power Button Tape Playback Controls Record Play Rewind Fast Forward Stop/Eject Pause Headphone Jack Speakers SIDE Microphone Jacks AUX IN Jacks AUX OUT Ja ...

The GPO Brooklyn Boombox features an integrated rechargeable battery, which allows the unit to be used anywhere, providing you with music on the go. Before turning on your Brooklyn Boombox for the first time, please ensure that the device is fully charged. 1. Remove the unit from the packaging and place on a flat, stable surface 2. Use the provided 240V power cable to plug the unit into the mains 3. While the unit is charging, the LED indicator on the rear of the unit will show a solid red 4. Once the LED indicator shows blue, the unit is fully charged Once charged, the unit will wait in standby mode until switched on. To s ...

When the unit is on standby, a 24 hour LED clock will be displayed for 10 seconds if you press the menu button on the front of the unit. The time can be set on the clock whilst the unit remains in standby mode: 1. Press and hold the central part of the Search Knob on the front of the unit for two seconds 2. The hour value on the clock will be highlighted 3. Change the hour by turning the central part of the Search Knob clockwise to move the hour forwards or anti-clockwise to move the hour backwards 4. Press search again to accept the hour and highlight the minute value 5. Change the minute by turning the Search Knob cloc ...

When rotating the volume control from 0-30, the LED display will notify you when you have reached MIN or MAX volume. The balance control is set to balance 00 as standard. The control can be used to change the balance between the left and right speakers, with the change displayed on the LED display. The treble and bass controls can be set between -7 and +7 to reach your desired level. Radio The GPO Brooklyn Boombox offers FM and DAB radio play functions. FM 1. Turn the unit on using the Power Button 2. Turn the Function Knob on the front of the unit to Radio 3. Move the Radio Mode switch to the FM position 4. Extend the aerial ...

2. Turn the Function Knob to Radio 3. Move the Radio Mode switch to the DAB position 4. The Radio LED light will be illuminated 5. If you have previously scanned for DAB channels, go directly to step number 11 6. To scan automatically, press the Menu button and then use the external part of the Search Knob to select Full Scan 7. Push in the central part of the Search Knob to begin the automatic DAB station scan 8. To scan manually, use the central part of the Search Knob to select Manual Scan 9. Push in the central part of the Search Knob to begin the manual DAB station scan 10. Select your cho ...

To perform a DAB Factory Reset, press the Menu Button, then use the Search Knob to select System, then Reset. You will be asked to confirm your decision by using the Search Knob to select “Y” on the LED before pressing the Search Knob a final time. DAB Software Version Check To check the version of DAB software the unit is running, press the Menu Button, then use the Search Knob to select System, then “SW VER.” The software can be updated using a USB stick loaded with the new software. In the event of a required software update, GPO Retro will make the relevant information available GPO_Brooklyn_Manual EU - Dec 2017_v2.in ...

2. Press Eject on the tape control panel to open the cassette tape slot 3. Insert a cassette tape into the cassette tape slot on the front of the unit 4. Close the slot 5. Turn the Function Knob to Tape 6. The Tape LED light will be illuminated and the timer clock will begin counting up from zero 7. This counter can be reset at any point using the reset button next to the timer clock 8. Use the play, tracking and stop buttons on the unit to play the cassette 9. The cassette auto stop will ensure the tape stops at the end of each side. At this point, eject the tape, remove it, turn it around an ...

2. Turn the Function Knob to CD 3. The CD LED light will be illuminated 4. Insert a CD into the CD tray on top of the unit and close the tray 5. PLEASE NOTE: The label of the CD should face the REAR of the unit when inserted. If you experience a read error, eject the CD, turn it around and re-insert it. 6. Use the play, tracking and stop buttons on the unit to play the CD 7. To skip to the next track, tap the Next button once 8. To move back to a previous track, press the Previous button once 9. To move forward through a track, press the FFWD button repeatedly – a long press will NOT move the ...

2. Turn the Function Knob to USB 3. Insert a USB drive into the USB slot 4. The USB LED will be illuminated, and the LED display will show READ 5. Playback will begin automatically 6. Use the play, tracking and stop buttons on the unit to play tracks from the USB 7. To move forward or backwards through a track, press the FFWD or REW button once, and then press Play/Pause when you reach the correct location on the track 8. To stop playback, press the Stop button 9. The USB drive can then be safely removed GPO_Brooklyn_Manual EU - Dec 2017_v2.indd 13 30/11/2017 14:50 ...

record button to record music to a blank USB stick. 1. Press and hold the record button on the main control panel, NOT the record button on the tape control panel 2. The LED display will show READY 3. Press and hold the record button a second time to confirm recording of the song which is playing 4. The LED display will now display a track number and the number of seconds recorded 5. The music will be written to the USB, and can then be played from any USB-compatible device 6. To stop recording at any point, press Stop on the main control panel 7. The LED displ ...

2. Turn the Function Knob to BT 3. The BT LED will be illuminated 4. Open your Bluetooth-enabled device and use the search function to find and pair with “GPO Brooklyn” 5. If prompted, enter the key 0000 6. When your device shows that the unit has been paired, use the controls on your device or the unit to choose and play tracks 7. While Bluetooth mode is enabled, the unit’s control panel will not affect playback 8. Once a device is paired with the GPO Brooklyn, the unit will NOT appear in Bluetooth search lists – to solve this issue, use the connected device to unpair the unit and ...

2. The AUX LED will be illuminated 3. Use the AUX-IN line on the rear of the unit to connect an external music source 4. The unit will then play back music from this source through the main speakers 5. Use the AUX-OUT line on the rear of the unit to connect external speakers 6. The unit will then play back music from your chosen mode through the external speakers 7. Use the unit’s controls to select tracks, and the external speakers’ volume controls to set the volume Microphone 1. Microphone mode is compatible with all playback modes 2. Simply insert a microphone into the MIC jack – sound from your ...

Make sure that the unit is fully charged and that the charging indicator is blue If not, please charge the device using the supplied charging cable. If your battery will not charge, contact GPO Retro directly for a replacement and instructions. DO NOT open the battery compartment without consulting us first CD isn’t Reading If you have a CD read error, you may have inserted the CD the wrong way. Eject the CD and turn it so that the label side of the CD faces the rear of the unit. I Can’t Control the Music from the Unit If you are using the Bluetooth function, playback must be controlled from your pair ...

Do not leave the unit connected to the mains once the battery has charged fully Do not open the battery compartment Do not move the unit while a CD has been inserted, as this can cause scratching Keep the unit dry, and store out of direct sunlight The unit can be cleaned gently with a dry cloth GPO_Brooklyn_Manual EU - Dec 2017_v2.indd 18 30/11/2017 14:50 ...