APART PIR7600 Owner's Manual

Text of APART PIR7600 Owner's Manual

APART PIR7600 • Read all documentation before operating your equipment.

Retain all documentation for future reference. • Save the carton and packing material even if the equipment has arrived in good condition. Should you ever need to ship the unit, use only the original factory packing. • Do not spill water or other liquids into or on the unit. • Make sure power outlets conform to the power requirements listed on the back of

REMOTE CONTROLLED PRE-AMPLIFIER

SLIMLINE SLIMLINE REMOTE C IRIR IR-LED CD-PLAYER TUNER DVD ..... IR - EYE RECEIVER OTHER IR-REMOTE CONTROL PIR-7600 IR-REMOTE CONTROL IR RECEIVER The external IR receiver send’s all (PIR7600 or other Rc’s) received IR codes to the PIR7600. The PIR7600 copy’s the IR signals to the IR output. All IR signals (system or foreign) can be extended with the PIR7600. IR EXTENDER Connect the IR-receiver to the IR output on the P

Local Stereo Input

Local MIC Input IR Remote Co Wall Control DOWN UP MIC ONLY MUTE IR Receiver IR Emitter Amplifier UTILITY ROOM MEETING ROOM Source 1 Source 2 Source 3 Source 4 PIR7600 REMOTE CONTROLLED PRE-AMPLIFIER 4
REMOTE CONTROLLED PRE-AMPLIFIER SLIMLINE SLIMLINE FRONT PANEL 1. Power switch To turn the unit ON or OFF, press the upper or lower part of this button. The LED above the switch will light to indicate that the unit is ON. 2. Front microphone inputs Stereo jack input for two balanced microphone inputs: MIC1 and MIC2 (possible to apply phantom power to MIC1 & MIC2 by setting jumper 1 & 2) Separate volume control (4) for each microphone input. Tri-band tone co

APART Amplifier Owners Instructions: