IOtech Personal Daq/3001 Installation Manual

USB 1-MHz, 16-Bit Multifunction Modules Personal Daq/3000 Series p/n 1136-0940 rev 2.1 *324400C-01* 324400C-01 IOtech 25971 Cannon Road Cleveland, OH 44146-1833 (440) 439-4091 Fax: (440) 439-4093 [email protected] [email protected] www.iotech.com Personal Daq/3000 Personal Daq/3001 Personal Daq/3005 ...

Personal Daq/3000 Series Installation Guide Contents (1) Install Software …… page IG-2 (2) Connect Signal Lines and Hardware ….. page IG-2 (3) Start DaqView ….. page IG-6 (4) Configure the System ….. page IG-6 (5) Collect Data ….. page IG-7 Customer Assistance ….. page IG-8 Reading Th ...

957593 IG-3 (1) Install Software IMPORTANT: Software must be installed before installing hardware. (a) Place the Data Acquisition CD into the CD-ROM drive. Wait for PC to auto-run the CD. This may take a few moments, depending on your PC. If the CD does not auto-run, use the Desktop’s Start/Run/Browse feature ...

Differential connection is made as follows: 1. The red thermocouple wire connects to the channel’s Low (L) connector. 2. The other color wire connects to the channel’s High (H) connector. (b) Add le. the PDQ30 Expansion Option, if applicab PDQ30 is not to be connected to a live device. Unplug the ...

957593 IG-5 (c) If u ower connector; then plug the TR-2 into a standard 120 VAC outlet. sing an optional TR-2 power option, connect the TR-2 to the Personal Daq’s external p *Do not connect the CA-179-x USB cable until step 2d. r Consumption1 Powe Model Power Consumption (Typical) 2 TR-2 Power Adapter 2 /3000 250 ...

LEDs -2 : Personal Daq/3000 Series modules have 2 LEDs located just right of their USB2 connector. The LEDs function as follows: Power LED: The “Power” LED blinks during device detection and initialization; then remains on solid as long as the module has power. If there is insufficient power the ...

957593 IG-7 (3) Start DaqView From Windows, open DaqView by double clic access the program. You will find DaqView Programs to access the group). Once the program is executed, software autom brings up DaqView’s Main Window. This wi detail in the DaqView Manual PDF included o (4) Configure the System king on i ...

(5) Collect Data Click the Enable Readings Column button (17), or the Start All Indicators button (5); the data acquisition begins and the readings column becomes active. Click the Acquire button (12) to send the data to disk. DaqView Main WindowChannel Setup Tab Selected Main Window, a Brief Descrip ...

957593 IG-9 Reference Notes: o Refer to the DaqView PDF for information regarding that application. o Refer to the Personal Daq/3000 Series Users Manual PDF for hardware related information, including pinouts and block diagrams. o The default location for PDF documentation is in the Programs group, which can be acc ...

Personal Daq/3000 Series Reading Thermocouples Personal Daq/30 d rily for high-speed acquisition of voltage inputs. However; they can also be used to obtai he application software in use. After taki g t e DaqView Users 1) Start DaqView. 2) Open the Hardware Configu ttings). 3) Select Differenti ...