laguna S45T Manual 

LAGUNA TOOLS 2072 Alton Parkway Irvine, California 92606 Ph: 800.234.1976 www.lagunatools.com Part No. MSHAPS45T-5-0167 © 2015, Laguna Tools, Inc. LAGUNA® and the LAGUNA Logo® are the registered trademarks of Laguna Tools, Inc. All rights reserved ...

TABLE OF CONTENTS CHAPTER 1. GENERAL INFORMATION 1.0 Outlooking of spindle moulders -------------------------------------------------------------------------------------1-0 1.1 Machine identification ------------------------------------------------------------------------------------------------1-1 1.2 Notes for the user ----------------------- ...

CHAPTER 1. GENERAL INFORMATION 1.0 OUTLOOKING OF SPINDLE MOULDERS SS-510 / plus series SS-511/512 series SS-512T/512L backward tilt SS-512L series/SS-513 series SS-513 pro series SS-513 plus series SS-513T Eplus w/ power feeder PS-515 w/ power feeder PS-515 plus w/ power feeder 1-0 ...

1.1 MACHINE IDENTIFICATION Machine model and serial number are punched onto a metallic plate placed on the machines frame giving access to the electric housing. For information concerning specifically the electric system pneumatic supply you must specify the data punched on the metallic plate. Note: I.C.U.: Interruption short-circuit Capacity ( ...

spindle moulder SS-513T Eplus PS-515/L PS-515 plus Dimension of working table mm 850x1300 850x1300 850x1300 Dimension of extension table mm 800x2500 800x2500 800x2500 Max. extension table support mm 450 450 450 spindle vertical stroke mm 180 250 130 below table top mm 320 320 320 above table top mm 360 360 360 3000/4000/6000/ 3000/4000/6000/ 30 ...

BASIC MODEL IDENIFICATION 1.4 NOISE LEVEL A-weighted sound pressure level measuring at workstation: SS-510TS 99.04 dB(A) SS-513T plus 92.93 dB(A) SS-512TL 93.79 dB(A) SS-512M+TC1 96.01 dB(A) A-weighted sound power level measuring : SS-510TS 110.6 dB(A) SS-513T plus 104.56 dB(A ...

1.5 SAFETY WARNINGS Woodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, there are certain hazards involved with the operation of the product. Using the machine with respect and caution will considerably lessen the possibility of personal injury. However, if normal safety precautions are ...

12. Keep children and visitors away. All children and visitors should be kept a safe distance from work area. 13. Don't force tool. It will do the job better and be safer at the rate for which it was designed. 14. Use right tool. Don't force tool or attachment to do a job for which it was designed. 15. Replace the warning labels if they fall o ...

1-5 10. Always feed workpiece against the cutter rotation. 11. Make sure spindle draw bar and draw bar nuts are securely tightened before operating. 12. Turn the main switch to “O”, indicate so with a sign and padlock the main switch before making all adjustments or servicing. (CE) 13. The wood dust ...

1-6 3) for workpiece guiding the use of: i) a fence. ii) a false fence wherever possible to minim is the gap between the cutter(s) and the fence plates. iii) a push block or push stick to aid hand feeding or wherever possible a de-mountable power feed unit. iv) roller or extension table to ...