NEC E651-T Operation & User’s Manual

Text of the manual

Large Format Display

Please find your model name in the label on the backside of monitor.

DECLARATION OF CONFORMITY ............................................................................................................. English-1

Important Information ................................................................................................................................... English-2 WARNING ....................................

DECLARATION OF CONFORMITY

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U.S. Responsible Party: NEC Display Solutio

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT

USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERV

FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE

FOLLOWING WHEN SETTING UP AND USING THE MULTI-FUNCTION MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liq

Your new monitor box* should contain the following:

• LCD monitor • Power cord*1 • Stylus pen*2 x 4 • Wireless Remote Control and AAA Batteries x 2 • Setup Manual Setup Manual Power Cord*1 Setup Manual Wireless Remote Control and AAA Batteries x 2 Stylus pen*2 x 4 * Remember to save your original box and packing material to trans

This device cannot be used or installed without the Tabletop

Stand or other mounting accessory for support. For proper installation it is strongly recommended to use a trained, NEC authorized service person. Failure to follow NEC standard mounting procedures could result in damage to the equipment or injury to the user or installer. Product

Attaching Mounting Accessories

The monitor is designed for use with the VESA mounting system. 1. Attach Mounting Accessories Be careful to avoid tipping monitor when attaching accessories. 400mm 400mm VESA Mounting Interface (M6) Mounting accessories can be attached with the monitor in the face down position. To avoid damaging the screen face, plac

Other Monitor Manuals