Matrix IC3 Manual 

Text of Matrix IC3 Manual 

Read all precautions and instructions in this manual before using this equipment. Keep this manual

for future reference. Improper assembly, maintenance or use can void the warranty terms. Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com ENG 1 Matrix IC3 model no.: IC-MXIC3B-01 Manufactured by: Indoorcycling Group GmbH Happurger Str. 86 90482 Nuremberg | Germany www.indoorcycling.com info@indoorcyc

Matrix IC3 TABLE OF CONTENTS

Important precautions page 3 Before you begin page 4 How to assemble the Matrix IC3 Indoor Cycle page 5-7 How to operate page 12 Initial install checks page 8 How to adjust the Matrix IC3 Indoor Cycle page 9-11 Resistance adjustment page 12 How to move the Matrix IC3 Indoor Cycle page 12 Preventative maintenance page 13 Daily maintenance page 13 Weekly maintenance page 13 Bi-Weekly maintenance page 14-15 Monthly maint

To reduce the risk of serious injury, read the following important precautions and information before

operating the Matrix IC3 Indoor Cycle. It is the responsibility of the owner to ensure that all users of the Matrix IC3 Indoor Cycle are informed of all warnings and precautions. Operate and maintain the Matrix IC3 Indoor Cycle only as described in this manual. Do not operate the Matrix IC3 Indoor Cycle until it is properly a

Matrix IC3 BEFORE YOU BEGIN

Dear Customer, Congratulations on selecting the Matrix IC3 Indoor Cycle. The Matrix IC3 Indoor Cycle offers an impressive array of features designed to enhance cardiovascular fitness, tone muscles, and develop endurance. Whether users are beginners or experienced athletes, the Matrix IC3 Indoor Cycle offers workouts that will help users to reach their individual fitness goals. IMPORTANT: Read this manual carefully before ass

HOW TO ASSEMBLE Matrix IC3 Indoor Cycle

Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com ENG 5 SW 17mm SW 13mm 3mm 5mm hand tight 1x 15mm Pedal Wrench 1x Please assure that nuts are tightened with significant force to minimize loosening during use. ENG ESP ���������� 1 3 2 A A (1 : 2) 4 STOP mark STOP mark Seat clamp must be tightened securely from both sides to minimize loosening durin

Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com

ENG 6 HOW TO ASSEMBLE Matrix IC3 Indoor Cycle SW 17mm SW 13mm hand tight 1x 1x 15mm Pedal Wrench 7 ���������� 5 ���������� 6 3mm 5mm
Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com ENG 7 HOW TO ASSEMBLE Matrix IC3 Indoor Cycle SW 17mm SW 13mm 3mm 5mm hand tight 1x 1x Pedal marked R installed on right crank (clockwise), Pedal marked L installed on left crank (counterclockwise). Pedals must be fastened with significant force to avoid loosening with use of the indoor cycle. 15mm Pedal Wrench ENG ESP 8 9 10 R L 13 mm Make sure the seat is f

The cycle tune-up must be performed at initial installation of the indoor cycle for optimal performance and

longevity. Please read and follow all instructions below. If the indoor cycle is not installed and tuned as described, components may wear excessively and the indoor cycle may become damaged. If you have questions about the installation, please contact matrix customer service www.matrixfitness.com Note: Some maintenance procedures require acid-, si

HOW TO ADJUST THE Matrix IC3 Indoor Cycle

The Matrix IC3 Indoor Cycle can be adjusted for maximum comfort and exercise effec- tiveness. The instructions below describe one approach to adjusting the Matrix IC3 Indoor Cycle to ensure optimal user comfort and ideal body positioning. You may choose to adjust the Matrix IC3 Indoor Cycle differently. Pedal strap adjustment: Sit on the saddle and position your feet on the pedals, with the balls of your feet direc

Saddle horizontal adjustment:

Proper horizontal adjustment of the saddle is very important in avoiding injury to the knees. Sit on the saddle and move the pedals until the crank arms are in horizontal position. Using your forward leg as a marker, your kneecap should be directly above the center of the pedal so that a straight line is created between knee and center of the pedal (see the dotted line in image below). To adjust the horizontal position of the

Begin with the top of the handlebar at relatively the same height as, or just slightly higher than,

the top of the saddle (dotted horizontal line A in the drawing below) and at a neutral fore/aft position (see dotted vertical line B in drawing below). If your knees touch the handlebars, or if you experience back discomfort while pedaling for extended periods of time, the height of the handlebars can be adjusted. First, dismount the Ma

The preferred level of difficulty in pedaling (resistance) can be regulated in fine

increments by use of the resistance knob. To increase the resistance, turn the resistance knob clockwise. To decrease the resistance, turn the knob counterclockwise. IMPORTANT: To stop the flywheel (wheel) while pedaling, pull up the red emergency handle. The flywheel should quickly come to a complete stop. Please make sure your shoes are fixed into t
Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com ENG 13 Regular maintenance must be performed on the Matrix IC3 Indoor Cycle for optimal performance and longevity. Please read and follow all instructions below. If the in- door cycle is not maintained as described, components may wear excessively and the Matrix IC3 Indoor Cycle may become damaged. Improper maintenance will void the w

2. To maintain the easy adjustability of the saddle

post, the saddle post should be cleaned and lubricated. Turn the rear adjustment knob coun- terclockwise and slide the saddle post out of the frame. Apply a small amount of lubricant spray to a lint-free cloth, and clean the saddle post (A). Next, loosen the rear lock handle and slide the saddle carriage as far back as possible. App- ly a small amount of lubricant spray to a lint-free cloth, and clean the

3. To maintain the easy adjustability of the hand-

lebar post, the handlebar post should be cleaned and lubricated. First, turn the front adjustment knob counterclockwise and slide the handlebar post out of the frame. Apply a small amount of lubricant spray to a lint-free cloth, and clean the handlebar post (A). Next, reinsert the handlebar post into the frame and adjust it to the desired height. Loosen the front lock handle and slide the handlebar carriag
Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com ENG 16 4. The brake pad will become worn as a result of repeated use. The Matrix IC3 Indoor Cycle should not be used if the emergency brake system is not working properly (see page 14)! Should you feel that the resistance system’s functions are deficient, it is essential to fine-tune the resistance system be- fore the bike is used again! Please check the se

Matrix Exercise Bike Owners Instructions: