HTC Vive Pre Manual 

Text of HTC Vive Pre Manual 

HTC Vive Pre Vive base stations

13 Getting started Setting up Vive for the first time 16 What is the play area? 16 Choosing the play area 16 Setting up the play area 17 Exploring Vive 19 Troubleshooting and FAQs General 21 Tracking 22 Setup 22 Trademarks and copyrights 2 Contents Confidential For review only

About this guide

In this user guide, we use the following symbols to indicate useful and important information: This is a note. A note often gives additional information, such as what happens when you choose to do or not to do a certain action. A note also provides information that may only be applicable to some situations. This is a tip. A tip gives you an alternative way to do a particular step or procedure, or lets you know of an option that you may fin

With Vive™, you can look and move around a room-scale virtual environment. Because your

physical location is tracked, you can explore and interact within immersive fantasy worlds. About Vive PRE (Developer Edition) Vive PRE includes the headset, controllers, and base stations that you need to start creating interactive VR experiences. In-box items may vary from the consumer version. Do not disassemble any of the hardware as it could i

3-in-1 headset cable

4 IPD (interpupillary distance) knob 5 Face cushion 6 Lenses 7 P-sensor 8 Lens distance knobs § Only use the cleaning cloth provided in the box to wipe the lenses. § Do not cover the P-sensor. Putting the headset on 1. Pull the headset down over your eyes. 2. Slide the straps around the back of your head, and adjust them so that the headset fits snugly and comfortably. 5 Unboxing Confidential For revie

HTC Vive Pre Adjusting the lens distance on the headset

The closer the lenses are to your eyes, the better the field of view. If you need to wear prescription glasses while using Vive, adjust the lens distance for space to fit your glasses in. 1. Pull out each lens distance knob to unlock it. 2. Rotate both lens distance knobs to adjust the lens further or closer to your face. 3. After you're done adjusting, push each knob to lock it back in. 6 Unboxing Confide

Using the IPD knob on the headset

Interpupillary distance (IPD) is the distance between the center of the pupils in your eyes. A quick way to get an estimate is by facing a mirror and holding a millimeter ruler against your brow. Use this measurement as a guide to adjust the distance between the lenses of the headset so that you'll have a better viewing experience. To change the distance between the lenses, rotate the IPD knob. As you adjust the IPD, you'l

Connecting a USB device to the headset

Plug in the USB 3.0 cable to the headset for using a compatible third-party device with Vive. 1. Push open the compartment cover to access the connector slots on the headset. 2. Plug in the USB cable to its corresponding slot. 3. Connect the third-party device to the USB cable end. 8 Unboxing Confidential For review only

HTC Vive Pre Cleaning or replacing the face cushion

Remove the face cushion to clean sweat or makeup stains from the foam or to replace it with the spare face cushion that comes in the box. 1. To remove the face cushion, peel off the foam starting from both ends of the face cushion until it detaches from the headset. 2. When cleaning the face cushion, hand wash with water or use toning lotion to remove makeup stains. Do not scrub, bleach, iron, or tumble dry. 3. To rep

Headset status light

The status light shows: § White when the headset is active § Flashing white when the headset is not tracked § Flickering white when the headset is on standby § Red when an error is encountered (with cables, display, or the like) Link box Use the link box to connect the headset to your computer. 1 3-in-1 cable 2 Power port 3 USB port 4 Mini DisplayPort™ Note: Cable is not provided. Use if your computer doesn’t support HDMI. 5 HD

Insert the USB cable on the USB port on the link box, and then insert the opposite end on

your computer's USB port. 4. Connect the 3-in-1 headset (HDMI, USB, and power) cables on the side with matching orange trims on the link box. Vive controllers Use the controllers to interact with objects in the VR world. Do not cover the sensors on the controllers as these are tracked by the base stations. 11 Unboxing Confidential For review only

USB charging adapter

6 Tracking sensor 7 Trigger 8 Grip button Charging the controllers Charge each controller using the USB cable provided. The status light shows a solid white when the controller is fully charged. Turning the controllers on or off § To turn the controller on, press the System button until you hear a beeping sound. § To turn the controller off, press and hold the System button un

Controller status light

The status light shows: § White when the controller is active § Flashing white when the controller is not tracked § Red when an error is encountered § Flashing red when battery is low § Flashing blue when the controller is pairing with the headset § Blue when the controller is connecting with the headset § Orange when charging Vive base stations The base stations track sensors from the headset and controllers. Do not cover th

When the base stations are turned on, it may affect some nearby infrared sensors, such as those

used by an IR TV remote control. Installing the base stations Do not attempt to pry open the base stations as it could injure you or damage the product. 1. Place the base stations on opposite sides of the room on a spot that’s above your height. It’s recommended to mount the base stations on a high shelf, tripod, or on a ceiling or wall. Avoid using unstable

Attach the power cables to each base station, and then plug them into a power outlet.The

status light should show as white. 4. Connect the base stations and set the channel. § With the sync cable (recommended). One base station needs to be set to “A” channel, while the other is set to “B” channel. § Without the sync cable. One base station needs to be set to “B” channel, while the other is set to “C” channel. To configure the channel,

Setting up Vive for the first time

Before you can use Vive, you’ll need to set it up. Walk through the setup process to install software, set up hardware, define your play area, and more. Make sure to sign in with your HTC Account to download exclusive VR content. To begin, download the Vive Setup file from www.htcvive.com. What is the play area? The play area sets the virtual boundaries of Vive. Your interaction with VR objects happen wi

If you’re planning to set up room-scale VR, choose a space that has a minimum play area of

around 6.5 x 5 feet (2 x 1.5 meters). § Place your computer right outside of this space. The headset cable can only extend by around 16 feet (5 meters) from your computer. Setting up the play area During the Vive setup process, you’ll be prompted to set the bounds of the play area. When tracing the boundaries of the play area, make sure that the floor is clea

HTC Virtual Reality Headsets Owners Instructions: