Midland ML801 Instruction Manual

2 CONTENTS Specifications.................................................................................................................................................02 Introduction.................................................................................................................................................. 03 What’s Included............................................................................................................ ...

Please read this manual carefully to understand its functions and operations. The ML801 you purchased is an advanced UHF in-vehicle two way radio. ML801 combines the very latest in electronic hardware with the most up-to date computer aided design and manufacturing techniques to produce an extremely compact mobile radio with outstanding specifications and performance. ML801 ...

SPARE PARTS UNITS QUANTITY In-vehicle radio pc 1 Mounting bracket pc 1 Microphone pc 1 Microphone bracket pc 1 User manual pc 1 Power cable pc 1 Screws pc 1 Please contact the retailer if any parts are missing. EMERGENCY CHANNEL ACMA has pre-allocated channels 5/35. Channel 5 is only for emergency application. Channel 5 repeater acce ...

Allows user programmable control of scanning, channel memories and selected options. Scanning Function Quickly finds radio channels. Individually Programmable DUPLEX Function Selectable only for individual channels in areas that have a repeater. This leaves others free for use as simplex channels. High Contrast Liquid Crystal Display Fully detailed LCD provides a visual indication of the selected c ...

2. Channel Up 3. Function [Menu] 4. Power On/Off & Brightness 5. Monitor 6. Scan 7. Channel Down 8. LCD Channel Display 9. Volume Down 10. Microphone Socket Microphone LCD Icons 1. Receiving 2. CTCSS/DCS (S=CTCSS, = DCS) 3. Scanning 4. Key Lock 5. Channel Display 6. RX/TX Signal Strength 7. Transmit Unique Flip Feature ML801 has a unique Display Flip function that allows the unit to be installed upsid ...

and the display will flash to indicate the volume setting. The volume level can be set from 01 (min) to 15 (max). The display will stop flashing and return to the selected channel display a few seconds after the last volume adjustment. Note: At minimum volume setting there should still be sufficient volume to be heard in a quiet cabin environm ...

Choosing which tone to use will probably be dependent on the other radios you talk to. If you talk to others outside your group who already use CTCSS or DCS tones you will need to select the tone that matches theirs. The ML801 includes most of the commonly used tone sets. If the users you talk to don’t currently use CTCSS or DCS, choose your own tones. There is no difference in performance between the two tone sets. The CTCSS ...

and will remain muted in that channel unless a signal containing your selected CTCC/DCS tone is received. Channels that do not have CTCSS/DCS enabled will remain open to all signals. You may activate CTCSS/DCS on as many channels as you wish except channel 5 which is designated for emergency use. Note: CTCSS/DCS may not work through some repeaters. ...

ML801 features a preset Squelch system. The Squelch sensitivity has been factory set to provide optimum performance in most environments. The sensitivity can be altered by the user if required to suit varying environmental situations. The Squelch can be opened or closed by pressing the key. When the Squelch is open, the receiver’s ...

allowing operation through repeater stations. Repeaters automatically retransmit your signal over a wider area providing greatly increased range. Duplex operates only on channels 1-8 & 41-48. When duplex is selected on these channels, the radio receives on that channel but actually transmits 30 channels higher. Channel Selecting 1 2 3 4 ...

for signals. Channels are scanned at 20 channels per second. When a signal is found, scanning will pause on that channel to allow the signal to be heard. Scanning will resume when the channel is clear again. Programming Scan Channels ML801 is supplied with all 80 UHF CB channels programmed into the scan memory. Any channels not needed can be removed if ...

will remain there for as long as the channel is busy. Once the channel has been clear for 5 seconds, scanning will automatically resume. If your radio is paused on a busy channel and you wish to remain there, briefly press the key. The radio will exit Scan mode and remains on the busy channel. If the radio pauses on a busy channel and you ...

Appendix: CTCSS/DCS list: 50 groups of CTCSS Frequencies 01 67.0 11 94.8 21 131.8 31 171.3 41 203.5 02 69.3 12 97.4 22 136.5 32 173.8 42 206.5 03 71.9 13 100.0 23 141.3 33 177.3 43 210.7 04 74.4 14 103.5 24 146.2 34 179.9 44 218.1 05 77.0 15 107.2 25 151.4 35 183.5 45 225.7 06 79.7 16 110.9 26 156.7 36 186.2 46 229.1 07 82.5 17 114.8 27 159.8 37 189.9 47 233.6 08 85.4 18 118.8 28 162.2 38 192.8 48 241.8 09 88.5 19 ...

01 023 19 116 37 225 55 325 73 452 91 627 02 025 20 122 38 226 56 331 74 454 92 631 03 026 21 125 39 243 57 332 75 455 93 632 04 031 22 131 40 244 58 343 76 462 94 654 05 032 23 132 41 245 59 346 77 464 95 662 06 036 24 134 42 246 60 351 78 465 96 664 07 043 25 143 43 251 61 356 79 466 97 703 08 047 26 145 44 252 62 364 80 503 98 712 09 051 27 152 45 255 63 365 81 506 99 723 10 053 28 155 46 261 64 371 82 516 A0 731 11 054 ...

You’re joining thousands of satisfied customers who enjoy & experience the benefits of the products we distribute. In the unlikely event that some technical difficulty arises with your purchase, be assured that we are most anxious to see that the problem is quickly rectified to your satisfaction. Please familiarise yourself with the following si ...