Midmark M9 Installation & Operation Manual

M9 / M9D M11 / M11D Description Page 7 Component Overview Page 8 Controls & Indicators Page 9 Calling For Service Page 33 Operation Page 11 Specifications Page 33 Maintenance Page 24 Installation Page 4 Important Information Page 2 Limited Warranty Page 43 ...

(information that you will need to provide for servicing - key information is highlighted) Model Number Serial Number Name of Owner / Facility / Department Date of Purchase Name of Authorized Midmark Dealer Telephone # of Authorized Midmark Dealer Address of Authorized Midmark Dealer 1 MA616300i 1 2 MODEL NUMBER SERIAL NUMBER ...

Intended Use of Product........................................................................................................ 2 Safety Instructions......................................................................... ...

The M9/M11 Ultraclave or M9D/M11D Autoclave can be used in medical and dental offices, hospitals, clinics, nursing homes, laboratories, and other facilities to sterilize heat and moisture stable reusable items (including dental handpiec- es) that are compatible with steam sterilization. Refer to Loading Trays ...

• Storage Temperature Range: ..... -22°F to 140°F (-30°C to +60°C) • Relative Humidity........................ 10% to 90% (non-condensing) EQUIPMENT ALERT The water must be drained from the unit’s reservoir before transporting or storing at 32°F (0°C) or below. Consult operator’s man ...

Adherence to the following recommendations for location of the sterilizer will contribute to optimum performance of the unit: Support Surface (A) - Sterilizer must be placed on a level surface to ensure that the chamber will fill correctly. Improper water level in the chamber could cause a sterilizer malfu ...

(M11) or 18 in. (45.7 cm)(M9) deep. Allow at least 2 in. (5.1 cm) clearance be- hind the sterilizer for air circulation. Distance To Side Wall (D) - If sterilizer is located next to side walls, there should be no less than 2 in. (5.1 cm) clearance between the side of the steri ...

1. Disconnect power cord from electrical outlet and allow sterilizer to cool. 2. Drain water from reservoir or do not tip sterilizer, allowing water to spill. Electrical Requirements Electromagnetic Interference This Midmark Sterilizer is designed and built to minimize electromagnetic inter- ference with other device ...

ing Safety Features . . . • dry cycle door stop prevents door from opening fully if there is a slight resid- ual pressure in chamber when door handle is operated. Door stop also retains door in a partially open position during drying cycle. • doo ...

DESCRIPTION OF COMPONENTS 1. Reservoir Access Cover 5. Display 2. Printer (Optional) 6. Trays and Tray Rack 3. Door and Dam Gaskets 7. Pressure Relief Valve 4. Water Level Indicator / Reservoir Drain Tube 6 2 5 SA172901i 3 4 1 7 Original Present Components Overview ...