Apple Xserve Replacement Instructions

 Xserve/Xserve G5 Front Bezel Brackets Replacement Instructions Follow the instructions in this sheet carefully. Failure to follow these instructions could damage your equipment and void its warranty. Note: Online instructions covering customer-installable parts are available at http://www.info.apple.com/installparts/. Note: These instruct ...

4. If the server is in the locked position (the yellow security LED on the front panel is on), use the Allen key that came with the server to unlock it. 5. If the cable management arm is not in use, unplug all external cables except the power cord. 6. Touch the server’s metal case to discharge any static electricit ...

9. Grasp the thumbscrews and slide the bottom housing forward part way to expose the two chassis levers. (Figure 2) 10. While depressing both levers, pull the bottom housing all the way forward and remove it from the rack. Figure 2 11. Place the bottom housing on a sturdy, flat surface and ESD mat. 12. Put on the ES ...

Removing the Installed Front Bezel Brackets 1. Using a Phillips screwdriver, remove the screws that attach the two front bezel brackets to the server. (Figure 3) 2. Remove the brackets from the server. Figure 3 Installing the Replacement Front Bezel Brackets 1. Position the right replacement bracket on the server and ...

 Apple Computer, Inc. © 2004 Apple Computer, Inc. All rights reserved. This document is protected under U.S. Copyright Law and International Treaties, and no part of this document may be reproduced in any form without written permission from Apple. Apple is not responsible for typographical, printing, or inadvert ...