Owon SDS6062 Manual 

Quick Guide Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com ...

Copy Right in this Manual © Lilliput Company. All rights Reserved. The Lilliput's products are under the protection of the patent rights in America and other countries, including ones which have already obtained the patent rights and those which are applying for. The information in this manual will replace all that in the materials ...

TestEquipmentDepot.com ...

1. General Safety Requirements .......................................................................................... 1 2. Safety Terms and Symbols ............................................................................................... 2 3. Quick Start ........................................................................... ...

1 1. General Safety Requirements Before any operations, please read the following safety precautions to avoid any possible bodily injury and prevent this product or any other products connected from damage. In order to avoid any contingent danger, this product is only used within the range specified. Only the qualified technicia ...

2 2. Safety Terms and Symbols Safety Terms Terms in this manual. The following terms may appear in this manual: Warning: Warning indicates the conditions or practices that could result in injury or loss of life. Caution: Caution indicates the conditions or practices that could result in damage to this product or other property. ...

3 Warning: The channels should adopt common basis during measuring. To prevent short circuits, the 2 probe ground must not be connected to 2 different non-isolated DC level. The diagram of the oscilloscope ground wire connection: Ground Clip Signal Input Oscilloscope Electrical Outlet Probe Power Cord The diagram of the ground wire ...

Introduction to the Structure of the Oscilloscope When you get a new-type oscilloscope, you should get acquainted with its front panel at first and the SDS series digital storage oscilloscope is no exception. This chapter makes a simple description of the operation and function of the front panel of the SDS series oscilloscope, ...

Light off: Only powered by battery without connecting AC Power 4. Control (key and knob) area 5. Probe Compensation: Measurement signal (5V/1KHz) output. (The signal parameters could be adjusted in SDS7072(V)) 6. EXT Trigger Input 7. Signal Input Channel 8. Menu off Left Side Panel Figure 3-2 Left side panel 1 ...

flash disk needs to use this port. 2. USB Device port: It is used to transfer data when external USB equipment connects to the oscilloscope regarded as "slave device". For example: to use this port when connect PC to the oscilloscope by USB. 3. COM / VGA port ( ...