IPCopper USC4060 Product Manual

OVERVIEW .........................................................................................................1 INSTALLATION....................................................................................................2 POWERING THE UNIT ON AND OFF...................................................................4 UNDERSTANDING T ...

1 IPCopper unit 1 Cat-5e patch cable 1 power cord 1 black USB stick, which is your external key 1 white USB stick, contains the product manual and IPCD4060 utility ...

with 4 TB recording capacity, 1 Gbps peak capture speed and 400 Mbps minimum sustained capture speed for recording Ethernet / IP traffic. Some of its key features include: • Electronic invisibility: The USC4060 uses neither an IP address nor M ...

The USC4060 may record the activity of an entire internet connection, a single computer, a group of computers or other networked equipment. The placement of the packet capture appliance determines which network traffic would be recorded. • To record all traffic that passes through the internet connection, place the pack ...

traffic, while the left-hand port is the management port* (for status checks and data retrieval only – no data received on this port would be recorded). Each Ethernet port has two lights, one green and one yellow. The green light, when shining, indicates that the link is up. The yellow light ...

To protect the packet capture appliance from power surges and other electrical fluctuations, we suggest that you connect the unit to power using a surge protector or UPS (uninterruptible power supply). Power surges may damage the USC4060 and/or cause it to malfunction. Powering up the USC406 ...

the appliance after first checking that the power and Ethernet cables are fully connected and the external USB key is fully inserted into the USB port. If the red error light persists, please turn to the Troubleshooting section for further suggesti ...

The front panel of the USC4060 has several LED lights and a small number of buttons, for use in determining the status of your device and preparing it to retrieve data. The diagram below outlines what each of these lights and buttons are, and what they are for. INDICATOR LIGHTS • REC: ind ...

The USC4060 features continuous loop storage and, after the unit reaches capacity, overwrites the oldest captured data with the newest. When this occurs, the overwritten data become irrecoverable. To avoid losing important data, it is advisable to take precautionary steps, such as download ...