IXIUM M8 Operation & User’s Manual
Text of the manual
Provided by www.ixium.co.uk
1
Contents
Package Contents .................................................................................................................................... 2
Before You Start ...................................................................................................................................... 2
Provided by www.ixium.co.uk
2
Package Contents
•
iXium M8 DVR Alarm Clock
•
USB Cable (USB to Mini USB)
•
Remote Control
Before You Start
Make sure you have charged the device for 8 or more hours prior to use.
It is recommended that you charge for at least 24 hours; however we know this is not always
possible.
Turn over for charging inst
Provided by www.ixium.co.uk
3
Overview: Alarm Clock
Figure 1
Figure 1 shows the controls that the clock uses. Nothing appears out of the ordinary, it looks just like
a standard clock. However it is packed full of useful features which enable anyone to monitor and
record events.
Controls: Alarm Clock
On/Off Switch
This is a flick switch. Flick
Provided by www.ixium.co.uk
4
Micro SD Card Slot (TF)
You are able insert a Micro SD card (TF) up to 32GB into this alarm clock.
When holding the clock with the back facing you, make sure the Micro SD card is facing down so the
contact points are not visible (Figure 2). Make sure the On/Off switch is set to the off position
whenever you insert
Provided by www.ixium.co.uk
5
When you have set the year press the Set button again and you will move onto the month and date
(same format as Setting 2). The first part to change is the month; much like the setting of the year,
use the Up and Down buttons to change the month. When you have selected the correct month
press the Set button agai
Provided by www.ixium.co.uk
6
Temperature C/F
You can switch between showing degrees Celsius and Fahrenheit but simply pressing the Down
button whilst the clock is showing the time/date/temp. Setting 6 and 7 show the same temperature
in both formats.
Setting 6
Setting 7
Alarm
Setup
To set the alarm press the Mode button so the display sho
Provided by www.ixium.co.uk
7
The alarm time is now set up, you can enable it by pressing Up from the Setting 8 display; it will
show the time that you have set the alarm for. If you only press the Up button once you enable to
alarm without the snooze function, if you press it twice you enable to alarm with the snooze
function. You can press
Provided by www.ixium.co.uk
8
Overview: Remote
Figure 3 shows the controls that are on the remote.
Figure 3
Controls: Remote
These buttons enable you to switch between the camera, video and audio recorder features
depending on what you need.
On/Off
To turn on quickly press the power button and the blue indicator will light up.
To switch the de
Provided by www.ixium.co.uk
9
When you are done recording audio quickly press the audio button and the red indicator will come
back on solid.
You can turn the clock off or use one of the other features when done taking audio.
Motion Detection Mode
Turn the clock on. When on, quickly press motion detection button and the blue indicator will fla