JK microsystems Flashlite 186 Operation & User’s Manual

  i Unless otherwise noted, this document and the information herein disclosed are proprietary to JK microsystems, Inc. Any person or entity to whom this document is furnished or having possession thereof, by acceptance, assumes custody thereof and agrees that the document is given in confidence and will not be copied ...

ii Limited Warranty JK microsystems, Inc. warrants each Flashlite 186 to be free from defects in material and workmanship for a period of 90 days from the date of purchase. This warranty shall not apply to any unit which has been subject to misuse, neglect, accident, or abnormal conditions of operation. JK microsyst ...

  iii Table of Contents Limited Warranty ............................................................................................................................ ii Table of Contents ........................................................................................................................... iii Overv ...

  Overview The Flashlite 186 single board computer is based on the RDC R8822 microcomputer. The R8822 is a high performance, 16-bit, single-chip microcomputer that is software compatible with the 80C186 family of microprocessors. DOS compatibility allows development in a familiar environment with a wide range of tool ...

2 Operation The Flashlite is configured with two ‘disk drives’ A: and B:. Drive A: contains DOS, the BIOS, and utility programs essential to the operation of the Flashlite. Drive A: is read-only. Drive B: is read/write and contains optional utility programs and is available for user files and applications. The se ...

  Getting Started To begin development with the Flashlite, you will need a PC compatible computer with a telecommunications program and a free serial port. Connect the Flashlite’s Debug/Console Port to the PC’s serial port with a 9-pin serial cable (straight through wiring). Run the telecommunications program and ...

4 If the transfer terminated without problems, you have a working development environment for the Flashlite controller. To transfer files from the Flashlite to the development PC, use the DOWN command described in the Utilities section of this manual. The Flashlite does not have a hardware clock calendar. The time an ...