Ingenico EFT930 B Operation & User’s Manual

Tél. 33(0)1 46 25 82 00 - Fax 33 (0)1 47 72 56 95 www.ingenico.com EFT930 Wireless Series U s e r G u i d e ...

2/36 Copyright © 2009 Ingenico 9000001568 R11 000 02/941 All rights reserved Contents 1. Introduction __________________________________________________ 4 2. Presentation__________________________________________________ 4 2.1. Content of the box ____________________________________________________4 2.2. Overview of the EFT930 _ ...

3/36 Copyright © 2009 Ingenico 9000001568 R11 000 02/941 All rights reserved 5. Base_________________________________________________________17 5.1. Base identification____________________________________________________ 17 5.1.1. Base charger (EFT930G or EFT930W) ______________________________________________17 5.1.2. Base Mode ...

4/36 Copyright © 2009 Ingenico 9000001568 R11 000 02/941 All rights reserved 1. Introduction We hope that you will be fully satisfied with your new terminal EFT930. This terminal comes in different models: EFT930G, EFT930B, EFT930P, EFT930W. Please read this guide to understand and make the best use of your terminal. It presents ...

5/36 Copyright © 2009 Ingenico 9000001568 R11 000 02/941 All rights reserved 2.2. Overview of the EFT930 Terminal Base Weight About 120g Dimensions 153 x 87 x 33 mm (L x w x h) Power supply unit Weight About 100g 2pole sockets 1 A The power supply unit is specially fitted for INGENICO terminals. Weight Between 360 g and 410 g, a ...

6/36 Copyright © 2009 Ingenico 9000001568 R11 000 02/941 All rights reserved 2.3. Keyboard details and functionality This chapter describes the key functions of a terminal with no specific application. Some keys can have other functions according to the applications that are in the terminal. 3. Use of the terminal ADVICE Before ...

7/36 Copyright © 2009 Ingenico 9000001568 R11 000 02/941 All rights reserved 3.2. Reading card Magnetic stripe card The card can be read either from bottom to top or from top to bottom, with the stripe facing the terminal. Use a regular movement in order to ensure a reliable card reading. Smart card • 1st card reader : insert ...

8/36 Copyright © 2009 Ingenico 9000001568 R11 000 02/941 All rights reserved 3.3. Switching off the terminal If the battery is empty and the terminal in use is removed from its base, the terminal automatically shuts off. It may also be forced stopped by pressing simultaneously and (yellow key) for one second. In order to resta ...

9/36 Copyright © 2009 Ingenico 9000001568 R11 000 02/941 All rights reserved 4. Installation 4.1. Recommendations Location of the terminal Place the base on flat surface near an electric socket and a telephone socket. The terminal should be placed far from any very hot zones, protected from vibrations, dust, damp and electromagn ...

10/36 Copyright © 2009 Ingenico 9000001568 R11 000 02/941 All rights reserved 4.3. Installing Modules 4.3.1. SAM1/SAM2 WARNING Switch off the terminal by disconnecting the power supply. The connector modules security SAM are located inside the terminal, in a closed compartment. • Turn the terminal and unclip the top cover fl ...